Temperature digital recorder

الوصف

1.1 Measured Items
              You can connect DC voltage, thermocouple, RTD, and ON/OFF and measure various values such as temperature and flow rate. The CR*******-BB1 samples the signals at the scan interval to obtain the measured values. The scan interval can be set as 1s, 2s and 5s. Up to four alarm conditions can be set for each measurement channel.

1.2 Data Storage Function
              There are two methods of recording measured data. One is to record the measure data continuously,
              and the other is to record only when certain events occur such as alarms. The measured data is
              recorded to the internal memory at a specified interval. The data in the internal memory can be stored
              to a CF card automatically or manually.


1.3 Display Function
            Measured data can be displayed as trends, numeric values, and bar graphs for each group. In addition,
            the overview display can be used to display and monitor all channels on a single screen.

1.4 DAQSTANDARD for CR*******-BB1
The accompanying software program, DAQSTANDARD for CR*******-BB1, can be used to display the measured data, convert the measured data format, and create CR*******-BB1 setup data.

1.5 Terminology
l  Memory sample
The operation of recording measured data.
l  Memory start
The operation of starting memory sampling.
l  Memory stop
The operation of stopping memory sampling.
l  Display data
The waveform data shown on CR*******-BB1 display. The data recorded at the sampling interval for the displayed data.
l  Event data
Measured data recorded at a sampling interval separate from that of the display data.
l  Manual sample