Third party inspection service Professional inspection company

الوصف

Package inspection of Guangzhou Huajian Commodity Inspection Co., Ltd.
 
1. Raw material quality requirements
PU material are normal. Slight rubbing of the paint surface will not cause whitening, breakage and blistering. The wear resistance must meet the national standard . There can be no yin and yang colors (except for some PU materials that have natural or multi-color effects). In the same package, color difference and wrinkles between PU materials are not acceptable.
1.2 Whether the fabric is knitted or woven, the fabric is required to be flat, not drawn, not knotted, and the color fastness is up to the standard.
1.3 The lining and webbing are rubbed *0 times with white cotton cloth, no fading, no desizing, no bleaching phenomenon, no drawing, no turning , no missing yarn, no yarn skipping , no hooking, no roving, no color difference, No belly yarn, no stains, no holes, no menstrual breaks, no creases, no wrinkles.
1.4 The zipper is rubbed with white cotton cloth for **0 times without fading or bleaching. Durability: **0 times of test pull, no missing teeth, no wrong teeth, no damage, the fabric is required to be the same as the inspection requirements of the lining and the webbing, the tooth chain is required to be free from dislocation, tooth loss, bright, no rust residue, no leakage plating, and buckle Tight, no shaking.
allowed (the acceptable length of 1.5cm width is less than or equal to 0.3mm for non-inductive scratches, and the non-inductive scratches are obvious by visual inspection and are judged as sensible scratches). (Black spots on the section are allowed, red spots and strip rust are not allowed), stains, deformation, material mismatch, pinholes, electrode shadows, white spots, water marks, acid spitting, delamination, and excessive pickling are not allowed .
 
2. Production process quality requirements
2.1 Quality requirements for embossing LOGO characters, embossing, watermarking and embroidery
2.1.1 The company's standard size LOGO should be uniformly used, and the embossed characters and patterns should be clear and unclear, and the fonts should not be adhered.
2.1.2 Wrong font (English) or wrong position will not be accepted.
2.1.3 Different embossing depth, color fading and wrong color are not accepted.
3.1 Oil edge quality requirements:
3.1.1 All parts that need oiled edges must be oiled more than three times, and if they are found to be uneven after one grinding, they must be polished.
3.1.2 The oil margin should not exceed 1 mm, the oil on the same part should not have color difference, and the color matching must be the same.
3.1.3 The side oil should not be over the surface, beaded and scratched, and should not be scraped, but should be full and smooth.