الوصف
Three phase SCR controller | Thyristor Control Firing Board |
Voltage regulation Power regulator
ST*0 three-phase rectification thyristor trigger regulator board
adopts **-bit industrial grade high-performance microprocessor,
high digital precision quality design, support network remote
control and on-site control mode. The fuzzy-PID parameter is
open-ended, which integrates open-loop voltage regulation,
closed-loop constant voltage and constant current in one, to
control the thyristor to achieve constant voltage current limiting
or constant current voltage limiting. The fault alarm and interface
parameters are displayed on the LED digital tube menu, and
parameters are automatically stored after setting. The control
board (regulator) has the functions such as phase loss protection,
power-on soft start, soft shutdown, constant current output,
constant voltage output, overvoltage protection, overcurrent
protection, short circuit protection, and working status
indication. It has three-phase full-control bridge rectification,
double anti-star rectification and thyristor anti-parallel AC
triggering mode, which can trigger thyristor below ***0A, suitable
for resistive load and, inductive load, capacitive load,
transformer primary side and other types of loads which adjust by
voltage and current regulation in various fields of industry. It
has been widely used in electrolytic and plating devices, battery
charge and discharge devices, three-phase thyristor power supply
devices, electric heating temperature control devices, arc
discharge control and other equipment.
This trigger board adopts industrial-grade high-performance
microprocessor, which continues to lead the innovation of core
control algorithms and software technology in the industry. The
structure of the control software package and the processing speed
of the single-chip microcomputer ensures all the adjustment of the
control loops to be finished during transform (conversion) time of
the six thyristor bridges in the main circuit, so that the voltage
and current loop sampling time can be less than 3.*3mS (*0HZ power
supply) or 2.*7mS (*0HZ power supply) for superior performance.
ST*0 three-phase digital rectification thyristor trigger regulator
has a variety selections of given control signal, and supports
analog automatic control modes such as **5Vdc, ***0Vdc,
***0mA, ***0mA, etc., and can also controlled by potentiometers
(*0K 2W) Manually. Flexible and convenient, with reliable and
stable performance, strong anti-interference ability, unique
anti-interference measures, normal operation in harsh interference
environment, complete control panel self-diagnosis and load
operation protection. It is also with power failure protection,
over-voltage protection, overload protection, phase failure
protection, etc. Therefore, regardless of the external or internal
interference types and fault signals, the performance of the
control board is safer and more reliable due to the above-mentioned
protection functions. The outputs are completely isolated and has a
wide application range. It has complete fault detection and alarm
indication and protection function. All parameters of ST*0 are
digital, no temperature drift changes which improves the adjustment
accuracy and power utilization efficiency.
II. Technical specifications:
Working power supply **0Vac ±*5%, *0/*0HZ
Main circuit working voltage *0~**0Vac ±*5%,
*0/*0HZ
Voltage adjustment range: 0 ~ **0%
Current adjustment range: 0 ~ **0%
Phase shift range 0~**8°
Adjust output resolution 1/***0
Stability accuracy better than ±1%
Trigger current: ≥ **0mA
Trigger capacity ≤ ***0A one-way thyristor
PID dynamic response time: ≤ *0mS
Overshoot: ≤ *0%
Input signal: DC**5V, DC***0V, ***0mA, ***0mA, *0K
potentiometer adjustment
Three-phase trigger imbalance ≤ 0.3°
Applicable load: Resistive, inductive, capacitive, transformer
load and other loads
Alarm relay contact capacity: **0Vac/*0A
Dielectric strength: ***0 VRMS
Ambient (working) temperature: **0°C~ *0°C
Working Relative humidity: ≤ *0% RH (no frost)
Indoor installation requirements no flammable, no explosive,
no corrosive gas, no conductive dust, and vibration should be less
than 0.5G
Dimensions: **0X**0X*8mm
Dimensions between install holes: **8X**8mm
Weight: 1KG
Altitude should be under ***0m, otherwise need to reduce the
capacity level.
ST*0 meets the standard:
IEC********2: Low-voltage switchgear and controlgear. Part
**2: Contactors and motor-starters. AC semiconductor motor
Controllers and starters.
GB****8.*****8: Low-voltage switchgear and controlgear Part
**2: Contactors and motor starters AC semiconductor motor
controllers and starters.
GB******9: Electronic Control Equipment Part II - Electronic
Control Equipment with Electronic Devices.
IEC******4: Electromagnetic compatibility, test and
measurement technology.
IEC*5: Safety of household and similar general purpose
electronic and related equipment powered by grid power.
III. Features:
1. Using **-bit industrial high-speed microprocessor, LED
digital tube menu for operation, fully automatic SMD
process manufacturing, stable and reliable performance.
2. With digital constant current, constant voltage
function, current limiting and voltage limiting function, it can
control the loads precisely. It has overcurrent and overvoltage
abnormal protection function.
3. Complete fault detection and alarm function,
real-time detection of load status, load current, control signal,
feedback signal loss and other parameters.
4. Intelligent PID control solution, parameter opening,
can be set to any physical quantity flexibly.Great dynamic
characteristics, adapts to different loads.
5. Phase loss protection: When the main circuit power
supply is out of phase, the alarm prompts, and the load is stopped
in real time to stop output
6. Interface compatibility: support **5Vdc, ***0Vdc,
***0mA, ***0mA and other automatic signals, direct interface
with various instruments and PLC, can be manually controlled by
potentiometer.
7. Overload protection: After starting, it will judge
whether the load is overloaded. When it continuous overload the
settled protection time, it stops running and the alarm relay
outputs;
8. Soft start: At startup, the output voltage will
gradually increase from zero to **0% to eliminate the impact on the
grid and itself during load operation. The soft start time
parameter can be set.
9. Soft shutdown: When stopped, the output voltage will
gradually decrease from **0% to zero to eliminate the impact on the
grid and itself when the load stops. The soft shutdown time
parameter can be set.
*0. It has the function of automatic phase sequence
identification, no phase sequence requirement for the power supply
of the control board, no debugging, very convenient wiring;
*1. Current loop (voltage loop) feedback signal
supports various analog signals such as transformer, Hall
current (voltage) sensor, ***5mV shunt, **5V, etc.
*2. Adopts intrinsically safe design, the control board
(regulator) is designed with the function of preventing thyristor
trigger interface from burnout protection, and supports and
output multi-function expansion board;
*3. All output ports and digital switch interface
are electronic isolated, it is of better anti-electromagnetic
interference protection.
بلد: |
China |
نموذج رقم: |
ST30
|
سعر فوب: |
220 ~ 230 / Piece ( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
China |
سعر الحد الأدنى للطلب: |
220 per Piece |
الحد الأدني للطلب: |
1 |
تفاصيل التغليف: |
With yellow paper box |
موعد التسليم: |
within 3 working days after payment confirmed |
القدرة على التوريد: |
1000 Piece per Week |
نوع الدفع: |
T/T, Western Union, PayPal |
مجموعة المنتج : |
- |