Thruscan

الوصف

 

 
International norms (NILECJ****1 L**5/IP*4/EN****0 Class1) In conformity with CE European Union Norms and produced under ISO ***1: ***8 QMS 
Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right) 
Separate Zone Sensitivity Setting Feature 
Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand 
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!.. 

SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object

Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators 
Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm. 
No Interferences between Zones and No False Alarms 

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top 
Detects Metals regardless their orientation 

*0 sensitivity levels, **6 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, Optional - 5 Preset Programs 

Metal Density-Mass, Signal Strength Display at **-level-VU meter with green, yellow, red LEDs easily allows sight from distance 
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By 

Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media 
Green/Red bicolor traffic through LEDs easily allows sight from distance *0 Persons/Minute and LED Alarm Indicators on side panels 
Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x*0 Characters LCD Screen 
Special Environmental Magnetic Interference Display Menu

Adjustable audio alarm at *0 tons/level or Soundless (Mute) operation

Adjustable Alarm Duration (Detection Speed Regardless Alarms) 

IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled 

IP *4 Protection Level (EN ****9) 

Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero 
Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken

Four-digit changeable digital Pin Code and Mechanical Lock 
Automatic Failure Display Function on LCD 

Reloading the factory default settings by one-touch

Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)

4 Menu Languages, Standard menu in English, German, Spanish and Turkish

Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

Easy-to-mount and assemble walk through metal detector (*5 Minutes) Male/Female Socket-Connector Design

Manufactured for 7/*4 Continuous Operation 
*4 cm Net Passage Width and **0 cm Net Passage Height 
Interference free Operation at Middle Level Sensitivity of *0 cm Distance Constant Metals and **0 cm distance Moving Metallic Objects 

Installation and Operation without interference between two detectors up to a distance of min. 5 cm

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings does not change when there is an electricity cut-off 

All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units. 
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use. 

Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment) 
SCADA Remote Control Set - Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional 

REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~*0.**0 ImagesOptional