Traditional Medical Vacuum Cupping From China

الوصف

Traditional Medical Vacuum Cupping From China

Cupping instruments
Application : cupping therapy
Structural components: It is composed of tank body, connecting head, hose and air pump gun. Hand operate will Produce Negative pressure .
Product features:
Vacuum, without ignition, easy to operate. The negative pressure method replaces the traditional ignition exhaust method. No need care of burn ,safe and secure.
The tank body is transparent and easy to observe. The tank body is made of non-toxic and transparent engineering plastics. Easy to observe the skin condition in the pot, easy to control the cupping time. With ergonomic design, according to the shape of the person, the mouth of the jar adopts the special design of wide side arc, which reduces the cupping, the pain when lifting the cupping, and increases the comfort when walking the cupping
Use method :
 1.Firstly, choose the acupuncture point according to the condition, 2.select the appropriate tank body and comfortable position
3. lift the piston on the top of the selected tank to ensure ventilation, and keep the mouth of the tank close to the skin.
4.After trapping the piston from the top of the tank body, vertical quick pull bar several times
5. The cupping can use the connecting pipe where the cupping cannot be used directly
6.After the tank is attached to the body surface, slightly ,the nozzle of the negative pressure gun rotate to backward, and gently press the piston to prevent air leakage.
7.The retention time of each cupping is ****5 minutes, and the elderly is short, usually ***0 minutes. At the end of the cupping, lift the piston and then the negative pressure will disappear.

Storage and transportation environment,
The temperature and humidity :
Transport and store temperature and humidity:
Well ventilated. And should avoid the strong sunlight and other gases and liquids which cause spoilage

1 set of A-type tanks:
*1Cup mouth outer diameter:*8.5mm
*2 Cup mouth outer diameter:*0mm
*3 Cup mouth outer diameter:*1.5mm
*4 Cup mouth outer diameter:*6mm
*5 Cup mouth outer diameter:*4mm
*6 Cup mouth outer diameter:*0mm
1 set of B-type tanks:
*1Cup mouth outer diameter:*2.5mm
*2 Cup mouth outer diameter:*4mm
*3 Cup mouth outer diameter:*5.5mm
*4 Cup mouth outer diameter:*7.5mm
*5 Cup mouth outer diameter:*8.5mm
*6 Cup mouth outer diameter:*4.8mm


Maintenance and storage:
After each cupping, routinely wipe the tank with disinfectant, alcohol cotton, and use a dry cotton ball to dry the alloy magnet mounted on the piston to avoid being soaked by sweat.
The tank should be protected from falling, hard objects and scratches. Do not soak in solvent, boil, and heat.
When the handle feels laborious, apply a little Vaseline evenly on the O-ring or the inner wall of the tank. The magnetic tank should be regularly maintained, and the left hand should be continuously rotated until the piston is removed, and then the dirt on the inner wall of the tank, the piston, and the O-ring is cleaned. It can be used after reinstalling.