سعر فوب
أحصل على آخر سعر|
- Minimum Order
بلد:
Ukraine
نموذج رقم:
-
سعر فوب:
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
-
تفاصيل التغليف:
-
موعد التسليم:
-
القدرة على التوريد:
-
نوع الدفع:
-
مجموعة المنتج :
-
Ukraine
الشخص الذي يمكن الاتصال به Aleksandr
Dnipro, Dnipropetrovsk Oblast
Installation bitumen grade UVB*1 is designed to produce both
anionic and cationic bitumen emulsions, which are used in road
construction :
for tack of the old pavement before applying them on asphalt ;
to prepare cold asphalt mixes ;
for the surface treatment of road surfaces ;
Device for thin coatings of protective layers ;
for patching roads etc.
technical characteristics
Parameter Value
1 Maximum performance (including preparation time ) , 8 m3/hr
2 Consumption of bitumen ( penetration at *0 ... **0 ) , not less
than *0.5 m3/hr
3 Water flow m3/hr 5 ... 7 *
4 Flow breaker ( with penetration bitumen below *0 ) , dm3/hr *0
... **0 *
5 Fuel acid dm3/hr *0 ... **0 *
6 Consumption emulsifier dm3/hr to *0 *
7 Consumption of adhesive additives dm3/hr 5 ... *0 *
8 Pressure bitumen at plant inlet , max 0.2 MPa
9 pressure is applied to the mixer bitumen , 1.4 ... 1.6 MPa
*0 The pressure of the aqueous phase supplied to the mixer , 0.2
MPa
*1 Temperature of bitumen entering the unit , ******0 C°
*2 Temperature of the water entering the plant , ****0 C°
*3 Lift height of the emulsion after installation (m) is not more
than *0
*4 Installed capacity more than *8 kW
*5 voltage power circuits at *0Hz, **0
*6, compressed air pressure , bar 4 ... 6
*7 Airflow, dm3/min **0
*8 Dimensions, mm , not more:
- length ***0
- width ***0
- height ***0
*9 Weight, kg ***0
* Depends on the formulation of the produced
emulsion
بلد: | Ukraine |
نموذج رقم: | - |
سعر فوب: | أحصل على آخر سعر |
الموقع: | - |
سعر الحد الأدنى للطلب: | - |
الحد الأدني للطلب: | - |
تفاصيل التغليف: | - |
موعد التسليم: | - |
القدرة على التوريد: | - |
نوع الدفع: | - |
مجموعة المنتج : | - |