vacuum cryotherapy fat freeze machine/whole body cryotherapy machine

الوصف

Cryotherapy technology refers to the treatment gradually reducing the subcutaneous fat. The fat cells are cooled down to zero degree and become solid. The low temperature selectively damage fat cells while leaving skin or muscle intact. The dead fat cells then are excreted through the liver.

2.Preparation before use

1. Install the 4 attached caster wheels on the machine, fasten the screws.
2. Install the attached on-hook on the machine, put the probes into the corresponding racks.
3. Before using the cryotherapy Slimming Machine, it is required to open the inlet and overflow behind for adding distilled water or purified water.
4. Connect the attached water funnel to the inlet, start adding purified water until water flows out from the overflow, and then close the inlet and overflow.
5. Check the host power cable is connected.
6. Check the key switch of machine is connected

7. 3.Treatment settings

    

8. *0 *0 minutes to each part (depends on the thickness of localizedfat)
9. You can only treat part by part, for example, to dissolve fat of the entire waist you need complete several courses. Please do not treat more than two parts of body in the same course of treatment.
10. Take another cooling procedure at the same position 2 months after the first course, which can reduce the extra fat layer thickness.
11. Ideal candidates for the Cooling procedure are relatively fit, but have some modest-size fat bulges that are not easily reduced through diet and exercise. They are seeking spot reduction for specific areas of fat, but are not considering a surgical procedure. The cryotherapy procedure is not intended for weight loss or obesity, and it is not a substitute for invasive methods such as liposuction.
12. Proposed use of clinical parameters:

13.  

    P1:    5 °C ~ 0 °C  (default *0 min)  is recommended for treatment part with less fat.

     

    P2:    0 °C ~ *2  °C  (default *0 min)  is recommended for treatment part with moderate fat.

     

    P3:   *2 °C ~ *5  °C (prednastaven *0 min)  is recommended for treatment part with much fat.

     

     

    4. Treatment process

     

14. Test the heart rate of the patient before the treatment [*****0 times per minute]
15. Check the fat thickness.
16. Clean the treatment area, remove the hair around.
17. Mark the size of the treatment area.
18. Apply the antifreeze fluid on the treatment area.
19. Paste the antifreeze film on the treatment area.
20. When receiving treatment, the patient should be sitting, making a *0°angle between his/her upper part of the body and thigh.
21. Use the freezing device to suck the skin of treatment area gently, and then set the intensity of the vacuum suction.
22. Use appropriate and constant suction intensity, the suction intensity is adjustable according to the patient's individual vulnerability. At the same time, the mode of suction and massage can be used.
23. After ****0 minutes of treatment, press the pause to suspend the suction, check and add antifreeze fluid.
24. Repeat Step *0 until the completion of the treatment [once again press the start to repeat], after that, turn off the power

25.  

     

    بلد:	China
    نموذج رقم:	vacuum cavitation slimming machines/Freezing fat cell slimming equipme
    سعر فوب:	1 ~ 3000 / Set ( Negotiable ) (قابل للتفاوض) أحصل على آخر سعر
    الموقع:	-
    سعر الحد الأدنى للطلب:	1 per Set
    الحد الأدني للطلب:	1 Set
    تفاصيل التغليف:	outer package: wooden case inner pack:PE form
    موعد التسليم:	3-7 Working days after payment
    القدرة على التوريد:	5000 Set per Month
    نوع الدفع:	T/T, L/C, Western Union, Money Gram
    مجموعة المنتج :	Slimming machine