الوصف
1) Rotary
Pumps:
**1) EM Series Two stage Rotary Pump (Edwards): The EM
range of oil-sealed rotary pumps - renowned for their high ultimate
vacuum, rapid pumping speed, quiet operation and ability to handle
vapour - have become the industry standard for laboratory and light
industrial applications.
******************************************************
**2) RV Series Two stage Rotary Pumps (Edwards): Edwards
RV pumps have become the industry standard for scientific primary
pumping applications. RV pumps are uniquely capable of delivering
high or low throughputs with high ultimate vacuum.
******************************************************
**3) RV Atext Two stage Rotary Pumps (Edwards) : ATEX RV pumps
have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G
IIB T4 and are suitable for use in potentially explosive
atmospheres.
******************************************************
**4) ATEX EM*8 One & Two Stage Rotary Pumps
(Edwards):
ATEX EM*8 pumps have an external ATEX classification of Ex II 2G
IIC T4 or Ex II 2G IIB T4 and are suitable for use in potentially
explosive atmospheres.
******************************************************
**5) Rotary Vane Vacuum Pumps TRIVAC B Range(Leybold): The
TRIVAC B is part of the well-pro- yen TRIVAC concept. All pumps
from the D 4 B to the D *5 B model are equipped either with
single-phase or three-phase motors. D *0 - *5 B models are equipped
with three-phase motors.
******************************************************
**6) TRIVAC BCS, Two-Stage Rotary Vane Vacuum
Pumps(Leybold)
: The TRIVAC BCS pumps are oil sealed vacuum pumps
operating according to the rotary vane principle. Oil which is
injected into the pump chamber is used for sealing, lubrication and
cooling purposes.
******************************************************
**7) TRIVAC E, Two-Stage, Oil Sealed Rotary Vane Vacuum
Pump (Leybold): The
TRIVAC BCS pumps are oil sealed vacuum pumps operating according to
the rotary vane principle. Oil which is injected into the pump
chamber is used for sealing, lubrication and cooling purposes.
******************************************************
**8) Rotary Vane Vacuum Pumps SOGEVAC (Leybold): SOGEVAC pumps
are oil sealed rotary vane pumps. Oil injected into the pump
chamber for sealing, lubrication and cooling of the pump is
recycled from the pump's oil reservoir and filtered, if required,
before it is injected.
******************************************************
**9) PentaLine Series Two stage Rotary Vane
Pumps(Pfieffer): PentaLine
rotary vane pumps that offer pumping speeds of up to *5 m3/h are
the perfect solution for applications in the low- and medium-vacuum
ranges of down to ***3 hPa.
******************************************************
***0) DuoLine Series Two stage Rotary Vane
Pumps(Pfieffer):
DuoLine rotary vane pumps cover all applications in the low and
medium vacuum range of up to ***3 hPa.
2) Oil Diffusion
Pump:
**1) HT Series (Edwards): The HT high
throughput series is the pinnacle of Edwards diffusion pump
knowledge with technology aimed specifically at industrial users.
These pumps are designed to give a high throughput (pressure
multiplied by pumping speed) at 4 x *0 mbar
******************************************************
**2) Oil Diffusion Pumps DIP Series (Leybold): The DIP range
of pumps was developed for operation in industrial systems.
Excellent vacuum performance data combined with the inherent
ruggedness of this kind of pump, make Leybold diffusion pumps a
reliable component in high and medium vacuum applications.
******************************************************
**3) Leybojet**0:The
water-cooled LEYBOJET **0 was developed especially with the medium
vacuum in mind. The principal areas of application of the LEYBOJET
**0 are modern sputtering processes as well as vacuum melting and
drying plants.
3) Dry Compressing Vacuum
Pumps :
**1) CXS Series Chemical Dry Pump(Edwards): The CXS
incorporates innovative screw design features with simplicity and
reliability in mind, a ‘Plug and Pump’ philosophy has been
adopted.
******************************************************
**2) CDX ***0 Dry Vacuum Pump (Edwards): The
CDX***0 is a double ended mechanism for the chemical process,
pharmaceutical and petrochemical industries.
******************************************************
**3) EDSeries - Dry Chemical Pumps (Edwards) : EDP pumps are
based on Edwards’ oil-free, non-contacting and reverse claw
mechanism. Dry pumps completely eliminate all problems of
process contamination and creation of polluted effluent, which are
experienced with traditional wet vacuum pump technologies.
******************************************************
**4) Diaphragm Vacuum Pumps DIVAC (Leybold): This range of
vacuum pumps was developed especially for laboratory operations and
as backing pumps for (wide range) turbomolecular pumps.DIVAC L
diaphragm pumps are suited for almost all requirements in the che-
mistry lab.
******************************************************
**5) Oil-free SCROLLVAC SC 5D to SC *0 D (Leybold): The scroll
pump is now being used as an oil-free vacuum pump. Every scroll
pump consists of two Archimedes spirals engaging each other with an
offset of **0°.act with the pumped medium are made of PTFE
(Teflon), FFPM (Kalrez) and PVDF (Solef).
******************************************************
**6) SCREWLINE Pumps series (Leybold) : The Screw
Vacuum Pumps SCREWLINE were developed in view of the special
requirements of industrial applications. Screw Vacuum Pumps are dry
com- pressing backing pumps, the operation of which is based on the
screw princi- ple.
******************************************************
**7) DRYVAC Pumps (DV **0 to DVR ***0 C-i) (Leybold) : DRYVAC is a
new family of dry com- pressing screw vacuum pumps avail- able with
different features depending on the specific application. The
DRYVAC family was developed in con- sideration of the special
requirements of the photovoltaic, display and pro- cess
industries.
******************************************************
**8) CHEMROVAC Pumps (CHEMROVAC TRV **4 to **0)
(Leybold):
The CHEMROVAC TRV pumps are *-stage roots pumps. Each stage con-
sists of two rotors rotating in opposite directions inside a casing
(pumping chamber) and having slight clearances against the inside
wall surface of the casing and also between the rotors.
******************************************************
**9) PFIEFFER
Dry Screw Pumps( HeptaDry Series) : HeptaDry pumps
are optimally suited for their applications in connection with low
and medium vacuum. The pumping speeds that are offered by this
series of products range from **0 to **0 m3/h. One special
advantage consists of their single-piece, variable-pitch rotors.Can
be used ideally either as stand-alone pumps or in combination with
our OktaLine Roots pumps.
4) ROOTS
:
**1) EH Series (Edwards)
******************************************************
**2) HVSeries Mechanical booster pumps (Edwards):These pumps are
backed by Edwards Dry Pumps or Mechanical Booster pumps.This range
of high capacity mechanical booster pumps is designed to operate
reliably for long periods with no need for maintenance.
******************************************************
**3) RUVAC WA/WAU (Leybold): The series
WA/WAU Roots vacuum pumps are provided with directly flange-mounted
air-cooled standard three-phase motors. The oiled radial sealing
rings of the RUVAC WA/WAU for sealing the shaft against the
atmosphere are made of FPM (FKM) (fluor polymer)
******************************************************
**4) RUVAC WS/WSU (Leybold) :The series
WS/WSU Roots vacuum pumps are provided with Air-Cooled Canned
Motors.
******************************************************
**5) RUVAC WH/WHU (Leybold): Both motors
and oil reservoirs are water cooled thereby perfectly balanc ing
the internal temperature manage- ment of the pumps resulting in
signifi- cantly lower oil temperatures and thus a longer oil
service life. At ultimate pressure, emissions are reduced by
approximately *0% and the motor coils can sustain higher loads
while at the same time offering improved efficiency.
******************************************************
**6) RUVAC WSLF (Leybold): The pumps of
these series are especially adapted Roots vacuum pumps from the
RUVAC WS series which are intended for operation with gas lasers.
They are driven by a canned motor so that a shaft seal for sealing
against atmospheric pressure is not required. Air-cooled series
with nominal pumping speeds of ***0 m3 x h*1 (**9 cfm) are
available.
******************************************************
**7) Convection cooled Series (OktaLine®) (Pfieffer): Convection
Cooled Roots Pumps offer pumping speeds ranging from **0 to *5, **0
m3/h. They can be safely employed for low and medium vacuum
applications in the coating or semiconductor industry, in research
& development, metallurgy or in chemistry and process
technology.
******************************************************
**8) Gas-circulation-cooled (OktaLine® G) (Pfieffer):High pressure
ranges and maximum differential pressures, in particular, are the
ideal site of operation for the OktaLine G series
as-circulation-cooled Roots pumps. They are a special version of
usual Roots pumps. An OktaLine G pumping speed of *****2, **0 m3/h
is achieved at various power levels, ranging from 5.5 kW up to *2,
**0 kW rated power.
******************************************************
**9) OktaLine® ATEX (Pfieffer)
5) Ions
Pumps:
**1) Miniature Pump (Varian):The Miniature
Vaclon pump is a diode configuration and provides approximately 0.4
I/s of nitrogen pumping speed. The 2 I/s model is a modified diode
configuration to enhance starting at low pressure. The *0 I/s pump
is a diode configuration with high efficiency for residual gases
such as hydrogen.
******************************************************
**2) Valcon Plus Series (Varian): Vaclon
Plus pumps are available with Diode, Noble Diode, and StarCell
elements for various nitrogen pumping speeds. Diode Vaclon Plus
pumps are regularly used in general purpose ultra high vacuum (UHV)
systems for evacuating electron devices, and in sensitive electron
microscopes.
6) Turbo Molecular
Pump:
**1) EXT & nEXT series (Edwards): Two basic
technologies are used in these pumps: magnetic bearings and
mechanical ceramic ball bearings. Ceramic bearings, which are
lubricated for life by either grease or oil, have replaced
conventional steel bearings. Magnetic bearings further increase
reliability. Edwards' EXT and nEXT turbomolecular pumps use a
hybrid bearing arrangement with a permanent magnet upper bearing
and an oil lubricated ceramic lower bearing.
******************************************************
**2) STP Magnetically Levitated Turbomolecular series
(Edwards): The
rotor is entirely suspended by magnetic bearings so all contact
between the rotor and the remainder of the pump is eliminated. As
well as giving very low vibration, the elimination of contact means
no bearing wear and no requirement for consequent pump
maintenance.
******************************************************
**3) Turbovac/Turbovac MAG (Leybold): The
turbomolecular pumps from Leybold generate a high and ultra-high
vacuum. In connection with a well rated backing pump, pressures
below ****0 mbar (0.*5 x ****0 Torr) can be attained.
******************************************************
**4) HiPace(r) Series(Turbopumps with hybrid bearing)
(Pfieffer)
******************************************************
**5) ATH-M Series (Turbopumps with *-axis magnetic
levitation) (Pfeiffer)
******************************************************
7) Valves and
Guages:
**1) APG **0 Active Pirani Vacuum Gauge (Edwards): Features
include compact size for easy installation, a linear output, and a
replaceable sensor tube. The new gauges are compatible with all
Edwards TIC instrument controllers and other active gauge
controllers and displays. They are also CSA, C/US approved as well
as fully RoHS compliant due to their lead-free construction.
******************************************************
**2) APGX-H Active Linear Convection Gauges (Edwards): Edwards
Linear Convection Vacuum Gauge has a wide measuring range from ***3
to 3 x **4mbar (***0 to 2.3 x **-Torr). The use of convection
technology ensures accuracy and sensitivity are maintained to the
top of the range.
******************************************************
**3) Model **0 Barocel(r) (Edwards) : The
Model **0 Barocel transducer is an advanced design capacitance
manometer which uses advanced technology to improve zero stability
after temperature excursions or pressure overloads.
******************************************************
**4) Model **5, **8 and **9 Barocel(r) (Edwards):The sensing cell
utilizes a unique diaphragm design, stitch welding process, and a
new sensing cavity geometry which provides enhanced resistance to
particulate contamination.
******************************************************
**5) CERAVAC Transmitters CTR **0 and CTR **1 (Leybold):The CERAVAC
Transmitter with its diaphragm made of pure aluminium oxide
ceramics offers excellent accuracy and reproducibility.
******************************************************
**6) THERMOVAC Transmitters TTR *1 / TTR *1 S / TTR *6 S
(Leybold):
THERMOVAC transmitters are active sensors (pressure to voltage
converters) using thermal conductivity according to Pirani. The
value of the trigger point (TTR *1S, TTR *6 5) can be switched
easily on the analog output and be shown on the display of the
operating unit.
******************************************************
**7) THERMOVAC Transmitter with Fieldbus Interface Profibus
TTR **1 PB / TTR **6 PB (Leybold): The
THERMOVAC transmitters have been developed especially for
integration into vacuum systems. Being active sensors (pressure to
voltage converters) with a well-proven Pirani sensing cell and new
operating and processing electronics these units offer a
measurement range which spans 5 x ***4 to ***0 mbar (3.*5 x
***4 to **0 Torr).
******************************************************
**8) PENNINGVAC Transmitters PTR **5 / PTR **5 S / PTR *3
(Leybold):
The PENNINGVAC transmitters have been developed especially for
integration in programmable control systems. As active sensors
(pressure to voltage converters) - equipped with a rugged cold
cathode sensing cell and with matched operating and processing
electronics - these transmitters offer a wide measurement range of
I x *0.9 to I x ***2 mbar (0.*5 x ***9 to 0.*5 x ***2 Torr).
8) OIL:
**1) Dow Corning: DC **4, DC **5
**2) Santovac 5
**3) Fomblin
**4) Krytox
Please contact us for details of our current stock or if your
company has a specific requirement, get in touch and we will strive
to meet your needs.
بلد: |
Czech Republic |
نموذج رقم: |
-
|
سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
- |
تفاصيل التغليف: |
- |
موعد التسليم: |
- |
القدرة على التوريد: |
- |
نوع الدفع: |
- |
مجموعة المنتج : |
- |