الوصف
1〠Double plow groove seat can not only make sure that the body,
seat and disc
connect correctly, but also ensure that the seat can be changed
conveniently,
which is helpful to avoid distorting by installation fault.
2〠Concatenate"O"series seal ring of the seat is enchased in the
axle hole of valve
body. The concatenate"O"series sealing ring will dilate out and
tangent with valve
body tightly and firmly when the stem insert the disc hole through
it. In this way,
when it leaks inside the valve, medium cannot afflux in the room
between body
and seat, which may result the accident of the seat locks disc or
the seat blowout.
3〠Raised seal surface is combined with disk. Torque is much
lower than former product. Life
time is extended. Narrowband seal ring is combined with spherical
disc organically, which
make sure that torque will not increase before the disc close up;
make sure that service
life of valve seat prolonged by friction decreased and open-close
torque reduced, to make
sure that open-close torque will not change in a long time.
4〠Stem spacer which locates between upper stem and down stem. It
prevents
down stem move upward.
5〠Seat locator is casted together with valve body. It prevents
seat from moving. Midplummer-
block spliced pole avoids frequent shake of the stem below which
may result
the stem divorced from valve body. Gibbosity on valve seat can
avoids the possibility
of seat distorted badly and torque increased rapidly, when the
valve was installed
improperly; and it also can avoid seat wriggling during the valve
is opened and closed,
when there is impurity on the surface of the seat after the vavle
is used for some time .
6〠Wide mount surface can be adopted by diversity flange types.
The flangesealing
surface of valve seat is the structure of broadside and
orthodrome,
which follows the requirement of thimble or welded flange
connection, and
also can be connected with many other flanges.
بلد: |
China |
نموذج رقم: |
-
|
سعر فوب: |
( Negotiable ) (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
500 Piece |
تفاصيل التغليف: |
as per requested |
موعد التسليم: |
within 30 days |
القدرة على التوريد: |
350000 Piece per Year |
نوع الدفع: |
T/T |
مجموعة المنتج : |
Butterfly valves
|