Waste plastic recycling machine with newest design

الوصف

Waste plastic recycling machine with newest design

1. Explanation of the whole process of waste plastic recycling machine working

1. To dry the plastic.

2. Feed the furnace with the dry and clean plastic.

3. After the plastic are loaded, close the feeding door and burn the hearth and start to heat the furnace, then start the power.

4. When the temperature reach **0°C, the oil gas begins to generate, it passes the interface channel and then goes into the atmolysis tower.

5.The heavy and light oil gas are separated in the atmolysis tower, the heavy one precipitate in the bottom, and the light one keeps on moving and going through the catalyst in the headpiece.(the quality of the oil catalyzed by the catalyst is better than the one never been catalyzed).

6. The oil gas catalyzed continues to pass the pipeline, and is turned into liquid fuel oil after the cooling of two condensers.

7. The fuel oil flows into the oil-gas separator, and precipitate in the bottom. Till the whole process is finished, we collect the oil by the oil-outlet.

8. HC gas generates while the system generates the oil gas, when the fuel oil remains in the bottom of the separator, it goes on passing the pipeline, and goes into the gasholder finally.

9. One part of the HC gas is leaded on to the hearth and burnt as fuel there; while the other part is burnt in the burner.

*0. In addition, the smoke dust produced by burning the fuel goes into the smoke dust processing system for purification treatment.

The whole system output into the air is only the water steam, so it can not affect environment.