الوصف

Atom I***0 - is a modern powerful reliable welding inverter with very high Mon (constant load). High quality design and workmanship, as well as accessories, can be fully confident in its reliability!
Atom I***0 is equipped with a new generation of microprocessor, which expands the possibilities welding power source and makes it easy to use. This device allows welding with direct current, using the inverter technology to convert and control the welding current on the basis of power IGBT transistors with a conversion frequency ~ *0 kHz. Application of advanced inverter technology reduces the weight and size of equipment to increase efficiency up to *0%. Applying the principle of pulse-width modulation (PWM) provides convenient and precise control of welding current strength, stability, and stability of the arc.
The device has a built-in automatic protection against overheating, and protection against voltage surges. When triggered, the protection indicator lights on the front panel, the welding current supply will be suspended, the cooling fan continues to run. Turning off the light indicates the unit is ready to go.

Inverter I-ATOM **0 provides:

♦ high quality welds
♦ a minimum spray metal
♦ a minimum current consumption during short circuits,
♦ immunity, eliminating the influence of the welding machine running on other power consumers.

Structural features invetora

♦ printed circuit board is covered with polyurethane varnish, which protects against dust and moisture;
♦ working confidently with all types of electrodes, including the possibility of welding osobootvetstvennyh structures (electrodes UONI**3/*5; UONI**3/*5, etc.);
♦ due to "stretch" the welding arc, suitable for welding in confined spaces. Ability to weld the ceiling and upper joints;
♦ high duty cycle (duty cycle) allows you to cook electrode "Quartet" (Ø 4.0 mm) in continuous mode;
♦ due to its high efficiency (*0%) can operate with electric power grid is not designed for heavy loads (houses, apartments, garages, etc.);
♦ can work with weak electrical networks (with reduced voltage up to **0V).
♦ can work from a generator capacity of at least 7 kW.

Trim

♦ Welding Machine
♦ Ground clamp "ABICOR BINZEL" cable .*
♦ electrode "ABICOR BINZEL" cable .*
♦ Manual.
♦ Warranty.

Operating voltage, V **0 (± *5%)
Power consumption, kW 6.0
The range of current control, A *****0
Duty cycle for 5 min at Isv = **0 A, **0%
The open circuit voltage, V *7
Efficiency,% *0
Used electrodes, 1.6 mm - 4
Degree of protection IP*1
Weight, kg 4.9
Overall dimensions (LxWxH) **0h**5h**5

The use of a microcontroller allows you to:
1. Accurately define the time parameters. (operation AntiStick, HotStart, charge capacitors)
2. Disable the add. function (AntiStick) depending on the installed power (position of the handle).
3. Intelligent fan control.
4. Manage thermal hysteresis (thresholds disable / enable) to optimize the duty cycle.
5. Extends the capabilities of the display.
6. Microprocessor control of inverter welding provides a robust feedback arc voltage with output parameters of the device - with the ignition of the arc device generates an additional impetus to the current (so-called "hot start"), and short-circuit welding current is turned off at once - that is, "heat the" electrode is impossible.
7. Control current-voltage characteristic (CVC).
8. Control thresholds functions AntiStick, HotStart