wire-meshed film faced plywood

الوصف

Wiremesh film faced plywood (Anti-slip)
1)Size
***0 x ***0mm, ***0 x ***0mm or as requested
2)Thickness
Different thickness available, from 4mm to *1mm
3)Core
poplar, birch, hardwood, combined or requested by clients
4)Face/back veneer if requested
poplar, birch, okoume, meranti, or requested
5)Glue
WBP, MR
6)Film
Wiremeshed Import dark brown film(Dynea or Store-Enso)**0g/m2,different designs available
7)Grade
A/A grade or requested
8)Packing
Inner with plastic bag, outside with 3plywood,then packed with sheet iron.
9)Application
Concrete forming for construction

MOISTURE (***2%) & DENSITY
PRODUCTS              WEIGHT(KG/M3)
BIRCH                 ABOUT **0

COMBINED              ABOUT **0
 
POPLAR                ABOUT **0
 
CONSERVE AND MAINTAIN:
HOW TO CUT THE BEST FROM OUR FILM FACED PLYWOOD
STORAGE
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.

SEALING OF EDGES
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.
SEALING OF HOLES

Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
CLEANING AND REPAIR

To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete