الوصف
Wood
drying and pelleting line is the process of making waste
biomass materials into solid fuel. The objects are used for burning
purposes. Wood Pellet is one of the most commonly used pelletizing
materials.
Wood
Pellet can be made from any type of Agriculture and forestry
waste:
Groundnut-shell,Sugarcane Biogases,Caster
Shells/Stalk,Saw dust,Coffee Husk,Paddy Straw,Sunflower
Stalk,Cotton Stalks,Tobacco waste ,Mustard Stalk,Jute
waste,Bamboo Dust,Tea waste,Wheat Straw,Palm
husk,Soybeans husk,Coir Pitch Barks/Straws,Rice
Husks,Forestry wastes,Wood Chips and many other Agro
wastes.
Wood
Pelletizing Plant/Wood Pellet Lines
Wood
drying and pelleting line is the process of making waste
biomass materials into solid fuel. The objects are used for burning
purposes. Wood Pellet is one of the most commonly used pelletizing
materials.
Wood
Pellet can be made from any type of Agriculture and forestry
waste:
Groundnut-shell,Sugarcane Biogases,Caster
Shells/Stalk,Saw dust,Coffee Husk,Paddy Straw,Sunflower
Stalk,Cotton Stalks,Tobacco waste ,Mustard Stalk,Jute
waste,Bamboo Dust,Tea waste,Wheat Straw,Palm
husk,Soybeans husk,Coir Pitch Barks/Straws,Rice
Husks,Forestry wastes,Wood Chips and many other Agro
wastes.
The
raw material moisture Content Should be Less than *2%, grain size
is below 5*5mm.
1.
Crushing Process:
When
the thickness of raw wood material is >*0mm, and >*0 * *0mm(L
* W), that need use the Wood Chipper to chip them into small
pieces, then crush the small pieces into wood powder with diameter
less than 3mm by Hammer Mill
(Crusher).
2.
Drying Process:
The
best moisture content to pelletize is about ****5%. Our Rotary
Dryer is made up of Stove and Main Rotary Dryer, which can reduce
the moisture from *0% to *0%. Our stove is fueled by sawdust,
wasted wood, coal, which can save electricity consumption largely.
Our Rotary Dryer is specially designed for energy saving purpose,
the outside of the dryer is covered with special cotton material
sheet to prevent the heat from
outrunning.
3.
Pelletizing Process:
MZLH
Wood Pellet Line is a most important equipment, which have the
following features:
The
lubrication system for wood pellet lines adopt the tracing and
inspecting system controlled by the microcomputer. When the
temperature of the bearing is over the normal temperature, the
microcomputer will start the Auto-Lubrication System to lubricate
the bearings, which completely solve the trouble of lubricating
roller depending on the operation experience. The Lubrication
System is made up of the tracing and inspecting system controlled
by the microcomputer, auto-lubricating system on time and compelled
lubricating system by hand.
Driving Gear adopts the high precision gear
transmission structure. The wear bearing is SKF from Sweden. The
ring die adopts the hoop fastening method, which is increasing the
speed of discharge comparing with the past bolt fastening method.
As a result, the capacity is ****5% higher than the belt
transmission structure.
As per
the wood pelletizing plant ring die and roller of the wood pellet
line, we have the fine machining with the alloyed steel. And our
heating treatment is also different from the other domestic
manufacturers. Our carburizing treatment make the depth of hard
facing to 2mm, which improve the anti-abrasion of the ring die and
roller more than *0 times, and it can save the production cost
heavily.
4.
Cooling Process:
After
the pelletizing process, the temperature of the wood pellet is
about ****0 degree, and the moisture content of the wood pellet is
about *5%, so we need use Cooler to reduce about **4% moisture, so
that the wood pellet will be easy to store. But
considering the feedback from some foreign clients, the local
climate is very humidity; they hope to cool the wood pellet with
moisture **8%. In order to satisfy the different need from
different clients, we develop one kind of new Stabilizer Combined
with Cooler.
5.
Packing Process:
After
cooling, the wood pellet will not directly enter into the fuel
process to avoid the wood pellet effected by damp. The packing
process is necessary. In this process, we assemble our domestic
best Semi-Auto Packing Machine for you.Generally, most clients
needs one small weight range scale with auto sealing packing
machine, and one large weight range scale with semi-auto packing
machine. For the first one, the weight range will be ****5kgs per
bag, and for large scale, it will be ***0kgs per bag or **0kgs per
bag, up to different clients needs.
Note:During the complete wood pellet line, the
Dust Filtering is one heavy and important task. We assemble the
Common Dust Collector(known as cyclon) and Impulse Dust Filter, for
the exhausting air, we use Water Film Dust Collector to get to the
free dust situation in the process of Drying and Cooling for which
generate plenty of dust in the working
time.
Dingli
is a main manufacturer of Wood Pelletizing Plant and Wood Pellet
Producer in China, who have specialized in the design of Wood
Pellet Line. We offer Wood Pellet Lines.High quality,best
service.
بلد: |
USA |
نموذج رقم: |
-
|
سعر فوب: |
(قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
- |
سعر الحد الأدنى للطلب: |
- |
الحد الأدني للطلب: |
1 |
تفاصيل التغليف: |
- |
موعد التسليم: |
- |
القدرة على التوريد: |
- |
نوع الدفع: |
- |
مجموعة المنتج : |
biomass equipment
|