الوصف

X-ray crawler :

X-ray based weld inspection helps to assure quality in pipeline Construction. The inspection of irregularities in welded seams is indispensable for quality assurance in the production of pipelines, whether for steel or other special alloys. Welded connections in pipes for gas or petrol transportation  must be inspected. X-ray technology has played a significant role in the field of weld inspection.

Component configuration

1. Crawler model no.: HR**0

2. X-ray head:  XXH****5

3. Battery: *0 × *1Ah *2V Lead-Acid batterys

4. Battery charger:  CDQ*6

5. Magnetic positioning system: HR-EID

1 Crawler features

1.1 Crawler dimension and weight 

Length with X-ray holder and X-ray control unit: ***0mm

Width with long axis wheels: **0mm

Width with short axis wheels: **3mm

Width without wheels: **2mm

Weight without Battery *9kg

Battery weight: *1kg

1.2 Crawl features

Maximum climbling : *0°

4 wheel-driven, so it features well Performance on slope

Applicable pipe diameter: **0mm ~ ***0mm

Maximum turning radius:7D

DC motor drive module:  *0A electric driving module and a spare circuit which can drive the crawler back in emergency.

Crawling speed: *8m/min.

The same speed in level and bevel pipe.

Maximum moving distance:> 4.2 kilometer (go and return)

Operating temperature: **0°C~**0°C.

Total exposuring time at **0kV:*0min

1.3 Crawler Control Panel

Component: 3 , 6 LED indicator and  4 digital LED windows

It can remember the operator setting tube voltage, exposure time, and other parameters in the EEPROM, and load it when power up.

Digital LED windows can display the battery voltage, Error code and other information.

1.4 X-ray head driving modul

X-ray head driving modul is put in a seal container at the back of the propulsion car. Only its heat radiator has airflow that cooling by 2 fans.

Modular construction and easy to replace

Credible protection circuit.

Season / run-in the X-ray tube automaticly according operator command

2 XXH****5 X-ray head

Dimension:Height- **0mm, Diameter***0mm

Weight: *0kg

Glass tube Anode target:Conic target

X-ray range:*0°***0°

Maximum penetration:*0mm A3 steel

Adjusting exposuring time: 0.2 7min

Adjusting tube voltage:**0kV **0kV

3 CDQ*6 Battery charger

CDQ*6 charge *2 number *2V Lead- acid Batterys or 6 number *4V Batterys at same time.

Charging step:Pre-charge qualification -> Fast charge:current regulation-> Fast charge:voltage regulation-> Maintenance charging.

Provides temperature-compensated maintenance(float) charging to maintain battery capacity.

Dimension:Lenght×width×Height=**0×**0×**7mm