سعر فوب
أحصل على آخر سعر|
- Minimum Order
بلد:
China
نموذج رقم:
-
سعر فوب:
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
-
تفاصيل التغليف:
-
موعد التسليم:
-
القدرة على التوريد:
-
نوع الدفع:
-
مجموعة المنتج :
-
الشخص الذي يمكن الاتصال به Anna
No.8 Shengda Road,Xinbei District,Luoxi Town., Changzhou, Jiangsu
Descriptions
XSG series
roating drier is developed by our company, and its techinology is
based on advance techinology adored.The machine is including many
superiority, such as reasonable design, compact stuction, widly
utilization, grrat productive capacity,good quality, high effect
and save energy, Drying, grinding and sieve are completed in one
equipment in once time. It eliminate pollution and the techinology
is reached international advance level.
Principles
Hot air
from machine bottom with suitable atomizing speed enter into the
stirring and crushing room, it process raw material by cutting,
shearing, blowing, floating and rotating. Then raw material is
granulated through centrifugating, shearing, impacting and friction
effect. This strengthens the process of heat exchange and water
evaporation. Materials enters into the drier through the screwing
feeding ostium, under the powerful high speed effect of stirring,
materials are distributed by the function of striking, friction,
shearing and cutting, raw materials are instantly smashed and fully
contact with hot air, they are heated and dried, the dried powder
material will be raised with the hot-air flow, small particles are
discharged from the ring center and collected by cyclone
segregator, the rest of materials are kept by graded ring and
processed by centrifugal action, throw forward to the inside wall;
then, drop to bottom, smashed and dried again. Because gas and
solid are rotated together, inertia of solid is bigger than gas and
the relative velocity between solid and gas is great, this
strengthens the process of heating exchange. Therefore, this
machine has strong drying capacity.
Features
The
material is acted by centrifugal force, shearing force, impact and
friction, the particle is very small and is in high degree
distributing state. Meanwhile the relative speed between air and
solid is big, it strengths mass and heat transmission. So it makes
the machine has high output.
The hot air
will enter into the bottom of the dryer and produce vigorous eddy
airflow. It will produce strong washing out and bring out effect to
material and eliminate the phenomenon of adhering wall.
At the area
of high temperature at the bottom of dryer, thermal sensitive
material does not contact with hot surface. It solves coking and
discoloring problem of thermal sensitive material.
Because
high cycle speed and short staying time of material in drying
chamber, high efficiency and big production of small equipment can
be got.
There is
eddy piece in drying chamber. It can control moisture of material
at lowest level.
The distributor at up part of drying chamber can control size and humidity of material at outlet.
بلد: | China |
نموذج رقم: | - |
سعر فوب: | أحصل على آخر سعر |
الموقع: | - |
سعر الحد الأدنى للطلب: | - |
الحد الأدني للطلب: | - |
تفاصيل التغليف: | - |
موعد التسليم: | - |
القدرة على التوريد: | - |
نوع الدفع: | - |
مجموعة المنتج : | - |