الوصف

                           FRP Tanks: *4" to *3" Diameter

Ying Han's water softeners treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling.

Softeners can be used in a variety of services including: industrial, municipal, and institutional applications.

Available Options
 Duplex, triplex or multi units
 Skid mounted, plumbed, wired systems
 PLC control system
 Alternate water meter types
 Brine pump systems
 PVC or CPVC face piping
 Steel resin tanks
 ASME coded tanks
 Butterfly control valves
 Inline hardness monitor
 Unistrut channel supports

                              Steel Tanks: *4" to *4" Diameter

Ying Han's water softeners treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling.

Softeners can be used in a variety of services including: industrial, municipal, and institutional applications.

Standard Features
 This series softeners are designed as fully automatic units either with timer or meter control. The timer control initiates softener regeneration at any predetermined time - on any or every day. The metered models start regeneration based on the total cubic meter
used.
 The automatic regeneration controller features a choice of 7 or *2 day calendar wheels. Time of regeneration and length of time for each regeneration cycle are fully adjustable.
 The steel tank is engineered for a **0 psi working pressure and is tested to **0 psi. It is equipped with a manhole in the upper dome.
 The interior of the tank is coated with epoxy for protection against rust and corrosion. The exterior has a rust inhibiting primer coat.
 A premium grade sulfanated nonphenolic polystyrene type resin is contained in the tank.
 The resin will deliver *0,**0 grains per cubic foot when brined at a rate of *5 lbs. per cubic foot.
 The brine tank is a combination of high density polystyrene brine measuring tank and a brine valve, including an air eliminator valve and a safety brine refill shut off to prevent tank overflow.
 The under drain utilizes either a hub & lateral or a header & lateral system to evenly distribute water and prevent resin loss, and to insure minimal pressure drop at peak flow rates.