الوصف

Specification:

Yongnuo First Wireless E-TTL Flash Trigger YN***2 C is Released now, it's designed for Canon Camera.

Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, E-TTL ( II ), Manual and Multi, and it can fire flashes at **0 degree direction, the operating range is **0 metres.

It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, ETTL II Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp.

Main function:

a), Support Full ETTL Pass-through function when on camera

1), Mount one YN***2C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or Multi mode.

2), Mount flash on hot shoe of YN***2C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or Multi mode.
Note: Speedlites on hot-shoe of transmitter support ETTL II / Manual / Multi

b), Shutter Sync

1), High-speed Synchronous
The max. sync speed is 1/***0s, but some camera is just 1/***0s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/**0s or less, different cameras have different Sync speed.

2), 1st. Curtain Sync

3), 2nd. Curtain Sync.

c), Remote Control Function

The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly.

d), Supporting mixed mode.

With this function, you can trigger remote speedlites in different modes, set up one YN***2C transceiver on hot shoe of flash in TTL mode, set up the second YN***2C transceiver on hot shoe of flash in manual mode, and the third YN***2C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu. ( you need to set the parameters on speedlites )

Note: Only FEC, FEB, Ratio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite.

e), Work with Strobe Studio flash light in HSS function

You can buy a PC Sync Cable RF***3 6.*5mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash torealize hihger syand then you can use them together in HSS. The max. trigger voltage is less than **0 Voltage.
Note: The PC port is for output using only.

f), Awaking function

When half-pressing the shutter of the camera, the hot shoe flash on the receiver will be awakened. ( for those flash has wake up function )

g), Zoom Function

Zoom Automatic: length will be charnged depanding on the changes of lens.
Zoom Manual: Zoom length is within *4 - **5mm
Zoom Lock

h), Support Single-contact of camera and flash triggering ( the max. Sync. speed is 1/**0s )

You can use it with Nikon camera or Nikon flash, but you just need to set up YN***2C in manual mode.

i), Flash Fire Ratio with ETTL

You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver.

j), Support 2pcs AA batteries, ( 1.2v rechargeable battery ), Stand-by time is *0hours.

k), Dimension: *9.5 * *3 * *9MM, net weight is *8g.

Note: There is a PC Sync port for YN***2C transceiver, you can use RF***2 PC / PC Cable to connect it with flash.

Suit for:

Camera:

A: The EOS DSLR camera with external flash control menu:

Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D *0D *0D *0D **0D **0D **0D **0D **0D ***0D ***0D

B: The EOS DSLR Camera without external flash control manual:
Canon 5D *0D *0D *0D **0D **0D 1D 1D Mark II

Flash:

Compatible ETTL Flash: ( It suport wireless remote control through camera menu )

Canon **0EX ( RT ), **0EX II, **0EX II, **0EX, **0EX II
Yongnuo YN***5EX C, YN***8 II C, YN***7 II C, YN***5 C ( Our yongnuo flash units don't support HSS Function )

Note: **0EX and **0EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters.

Package including:

2 x RF***2 C transceivers
1 x Instruction in English and Chinese
1 x Original Yongnuo Box