ZK60 Magnesium Alloy bar

الوصف

ZK*0 Magnesium Alloy bar

Direct chill cast bar is manufactured by KUNFU as the starting material for other magnesium products, such as sheet, plate, forgings and extrusions. However, it has been frequently found that the cast billet is suitable for machining into prototypes, thus avoiding expensive tooling, and in some cases for production where the size of the finished items is outside economic casting or extrusion dimension or minimum economic production. The Diameter of the cast billet is from Dia. *0mm to max. Dia. **0mm. The max. length is ***0mm.

Cast billet is supplied to clients on the compositional and homogenized condition. The Chemical Composition is as per AZ*1B, AZ*1A, AZ*0A and ZK*1M. Inspection standards for billet will be by agreement. Ultrasonic Inspection as per AMS-STD****4 Class A. Temporary corrosion preventative surface treatments can be applied by agreement.

CONTINUOUS CAST MACHINING MAGNESIUM ALLOY SLAB

KUNFU supplies direct chill continuous cast machining slab for manufacturer of parts which are larger than possible by conventional production methods, the shape of slab is rectangular, with two opposing faced and edges (if required) machined, and then sawn to ordered size. The alloy for machining stock is AZ*1B per the chemical composition requirements of ASTM B*0/B*0M**7.

Max. Thickness: **0mm (after machining)

Max. Width: **0mm (after machining)

Max. Length: ***0mm (after sawing)

Special required alloy and size combinations may be available on enquiry.