الوصف

The changing oil quantity can be returned by oil separator due to the factors of design, load and defrosting period of system. Because of this ,we need to have a safety oil stock for oil control system. Oil receiver is a vessel for storing oil. It has glass adaptor to inspect the oil level in the device. The valve on the top of oil receiver gets oil from oil separator. The valve on the bottom of oil receiver can distributethe oil to oil regulator. The top position of the receiver has a 3/8” SAE connector in order to add or remove oil from oil receiver. The separated oil from oil separator goes into oil receiver with high pressure and the pressure in oil receiver can gives bad infection to oil regulator. In order to prevent bad result, we can set a pipe on the top of oil receiver and thia pipe can relief the pressure so that the pressure in oil receiver will be similar to the pressure in pipe and compressor crankcase.

Features:

1. ZRR series oil receiver is used for depositing the oil that it have not remained in the crankcase and oil separator an no circulation.;
2. ZRR series oil receiver’s inlet and outlet install a cut-off valve that could be rotated **0°C for fix it.
3. Oil in the mirror depending on the availability of oil red float instructions. It can be seen through the oil receiver inside the case, the top there is a oil pressure check valve 3/8” SAE interface.
4. ZRR series oil receiver must be installed on vertical and the safety working pressure is **0 PSI.

Design Functions:

1. End cover(ST*2);
2. Steel shell(Q**5);
3. Oil sight glass;
4. 3/8” SAE connection(*0#);
5. Bracket.

Specification: