Lafe Chemical Industrial Group Co.,Ltd

Virgin & Recycled HDPE Granuels Film Grade / Injection Molding Grade / Blowing Molding Grade / Extrusion Grade / Pipe Grade / etc. 1. Product Descri

Specification: Name: 100% Virgin High Density Polyethylene (HDPE); Grade: Blow Molding Grade, Filament Grade, Film Grade, Injection Molding Grade, Pip

LDPE Granules Low Density Polyethylene LDPE Pellets LDPE Resin LDPE Particle LDPE Granular Grade:Recycled, Virgin Introduce: LDPE resins are made by

Item Testing standards Test Conditions Units PG-22 PG-33 PG-80 PG-80N PG-383

recycling plastic hdpe granule Grade Density (kg/m3) Melt Flow Rates (g/10 min) B4660 961 0.7 Applications: water, juices, milk and other dairy produc

Name Low-Density Polyethylene Plastics Recycled CAS No. 9002-88-4 HS Code 3901 909000/3901 100090/3901 100001 Appearance

Specification: Properties Unit Test method Value Melt Flow Rate Melt flow rate(230C/2.16KG) g/10min ISO 11

Specification: Properties Unit Test method Value Melt Flow Rate Melt flow rate(230C/2.16KG) g/10min ISO 1133 12 Mechnical Properties Tensile mo

Specification: Properties Unit Test method Value Melt Flow Rate Melt flow rate(230C/2.16KG) g/10min ISO 1133 12 Mechnical Properties Tensile mo

Specifications PET BOTTLES SCRAP COMMODITY : PET BOTTLES SCRAP ORIGIN : &n...

Polyvinyl Chloride Resin SG3 SG5 SG8 Quality standard GB5761-93 Inspection item Guaranteed Value K value 72 - 71 68 - 66 59 - 55 Viscosity number 135

PVCResin(PolyvinylChlorideResin)SG5, SG3... Specification: Polyvinyl Chloride Resin SG3 SG5 SG8 Quality standard GB5761-93 Inspection item Guarante

PVCResin(PolyvinylChlorideResin)SG5, SG3... Specification: Polyvinyl Chloride Resin SG3 SG5 SG8 Quality standard GB5761-93 Inspection item Guarante

PVCResin(PolyvinylChlorideResin)SG5, SG3... Specification: Polyvinyl Chloride Resin SG3 SG5 SG8 Quality standard GB5761-93 Inspection item Guarante

PVCResin(PolyvinylChlorideResin)SG5, SG3... Specification: Polyvinyl Chloride Resin SG3 SG5 SG8 Quality standard GB5761-93 Inspection item Guarante

PVCResin(PolyvinylChlorideResin)SG5, SG3... Specification: Polyvinyl Chloride Resin SG3 SG5 SG8 Quality standard GB5761-93 Inspection item Guarante

PVCResin(PolyvinylChlorideResin)SG5, SG3... Specification: Polyvinyl Chloride Resin SG3 SG5 SG8 Quality standard GB5761-93 Inspection item Guarante

Specification: Properties Unit Test method Value Melt Flow Rate Melt flow rate(230C/2.16KG) g/10min ISO 1133 12 Mechnical Properties Tensile mo

EVA foam sheet EVA foam(Ethylene Vinyl Acetate) has a closed cell structure, it is environmentally friendly foam material.It can be used for laminate

Item Testmethod Testdata Dataunit Density ASTMD-1505 0.948 g/cm3 MFR(meltflowrate) ASTMD-1238 10.0 g/10min Tensileyieldstrength ASTMD-63...

WearedirectfactoryofHDPE, LDPE, LLDPE, PPgranule, differentMFRorMFIareavailableforyourdiffere...

PPPipeGrade ITEM Unite Value TestMethod MeltMass-FlowRate g/10min 40 GB3682 Density kg/m3 905 ASTM/D1505 Tensile...

R ITEM Unite Value TestMethod MeltMass-FlowRate g/10min 40 GB3682 Density kg/m3 905 ASTM/D1505 TensileStrengthatYield M...

Product Descriptions Polyethylene (PE) Polyethylene is the most commonplastic. This product is made by the polymerization of ethylene (agaseoushydro

Product Descriptions Polyethylene (PE) Polyethylene is the most commonplastic. This product is made by the polymerization of ethylene (agaseous.

HDPE (injection grade) Density 0.952 kg/m3 MFR(at 190 and 2.16kg) 8.0 g/10min Secant modulus at1%elongation 1000 Mpa Tensile strength at yield 26

Specification MFR4.6 Properties ASTM method Test Condition Unit Typical Value Specific Gravity D542 --- --- 1.046 Melt Flow Index D1238 200C, 5 kg

pvc granules , pvc compounds , raw material of products. application :all kinds of pvc granules , such as rigid , soft , clear and all kinds of color

High-densityPolyethylene(HDPE) Specification: FilmGrade Item Testcondition TestMethod Value Unit Density ISO1183 0.944-0.955 g/cm3 MFR 190C/2.16kg IS

High-densityPolyethylene(HDPE) Specification: FilmGrade Item Testcondition TestMethod Value Unit Density ISO1183 0.944-0.955 g/cm3 MFR 190C/2.16kg IS

High-densityPolyethylene(HDPE) Specification: FilmGrade Item Testcondition TestMethod Value Unit Density ISO1183 0.944-0.955 g/cm3 MFR 190C/2.16kg IS

PET scrap bottles in bales Wen can offer you PET bottles scraps of different types on regular basis. Our Pet bottles are Clean and clear. Loaded in

Suspension Grade SG1 SG2 SG3 SG4 SG5 SG6 SG7 SG8 Kvalue&nbs...

Properties Unit Test method Value Melt flow rate(230C/2.16KG) g/10min ISO 1133 12 Tensile modulus of elasticity(v=1mm/min) Mpa ISO 527-2 1550 Tensile

Film Grade Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength

1, LLDPE film grade Tests Value Unit Melt Flow Rate (MFR) 2.00.4 g/10min Density 9202 Kg/cm3 Tensile Strengthat Yield 8 Mpa Tensile Strengthat Bre

High-densityPolyethylene(HDPE) Specification: FilmGrade Item Testcondition TestMethod Value Unit Density ISO1183 0.944-0.955 g/cm3 MFR 190C/2.16kg IS

Good quality and Low price Description: LLDPE / linear low density polyethylene virgin and recycl...

ITEM Unite Value Test Method MeltMass-FlowRate (MFR, 2.16kg) g/10min 0.04 GB/T 3682 MeltMass-FlowRate (MFR, 5kg) g/10min 0.28 GB/T 3682 ...

1.Product Name:jade pet resin 2. Characteristics: Excellent transparency and good gloss Excellent formability Good Tensile stre...