100% no asbesios high density Portland cement wallboard manufacturer

الوصف

**0% no asbesios high density Portland cement wallboard manufacturer

Calcium Silicate Board is a kind of  green building materials ,it is using cellulose fiber reinforced, and adding other auxiliary materials.
Calcium Silicate Board combined with the production of the most advanced technology.with features of fireproof,waterproof,soundproof,lightweight,low density and ect.
**0% non-asbestos make it to be energy and environmental friendly.
Calcium Silicate Board is widly using in industrial architecture,factory,plaza,apartment,commercial building,shopping mall,department store,entertainment venue,hotel,warehouse and ect,it can be applied to any kind of buildings required a higher ceiling and partition. 
 
Features of **0% no asbesios high density Portland cement wallboard​

 1. Lightweight: The partition board adopts many kinds of organic material and the admixture match into  a slurry mixture, and then using high-tech to import the air bubbles in the mixture, forming numerous single  micro  bubble  consortium, so the product is lighter than wood, can float on the surface of the water.

 2. Sound insulation: Air layer is the best sound insulation material. The structure of our board contains  single hole, double holes and three holes. Also added closed bubbles in the raw material. Its porosity can  absorb sound wave, then the sound wave can consume the sound. Therefore, the board has the function of  sound-absorbing and sound insulation.

 3. Heat preservation: The thermal conductivity(W/m.K) of commonly used construction materials is  separately about: Rock wool board 0.*5, polystyrene board 0.*1, aerated concrete block 0.*9, two rows concrete  block 0.*8. The GM board is 0.**4, which has the lowest thermal conductivity. It itself is a high-performance,  inorganic heat preservation material, with highly saving rate, its the best wall material for energy saving.

 4. Fireproof: One of the main raw material is fire extinguishing agent, it can separate the Oxygen and  prevent combustion. Non-combustion, strong fire-resistant and thermal insulation,  the wall refractory  limit  of *0mm above 3hours, building fireproof rank can reach A level.

 5. Compressive, bending and impact: Add millions of Alkali resistant anticorrosive short fibers into the  board, pulp and fiber coagulation after hardening can form a strong bond stress, it has the function of  reinforcement, further increase the tensile strength and elasticity modulus.

 6. Earthquake Resistance: The board is a flexible connection building components in aseismatic design,  neither the stiffness nor the seismic capacity is concluded. Under seism action, due to the use of a U-shaped steel clips connector between surrounding walls and the subject wall, and strengthened by cross nails between  every two panels, guarantees the board connection points rotating and ductility in the panel, to ensure that  the wall can adapt shift between the main structure layer in different directions, the main structure deformation  can meet the standard of earthquake fortification intensity.

 7. Anti - tidal water: Our products add a special material invented by our company, making our products  apart from other aerated wall materials, it doesnt get damp or mildew in wet conditions.  The use of modified admixtures, making the principal crystalline phase of our material from crystalline phase to  gel type, reducing  the activation of the substrate by contact with water etching,  thus delaying  the decomposition of the material to ensure that no expanded and no deformed by water erosion.

 8. Customization: Wall panels can be customized unconventional size according to the construction  drawing, prefabricated L-shaped corner, reduce seams and increase strength.

 9. Fast installation: Compared with the traditional masonry small wet construction, the large pieces of  installation can increase the work efficiency more than *0 times.

 *0. Simple Structure, convenient adornment: Be cut wantonly, good nail-holding powder (directly drive nails or use pneumatic nail to fix the decoration materials).

 *1. Pipeline installation: Water and wire tubes can be installed directly from the plate penetrates by  partially opened a hole, reduce the labor cost for open slot, reduce the cracks and damage to the panels.

 *2. Long-distance transport: Each semi-trailer can carry about more than **0㎡, not overrun,  not high,  and high efficiency. At present, its the lowest cost of transportation loading and unloading wall materials in the market.

 *3. Extensive usage:
 A. Partition,corridors, air duct, pipe well in high-rise frame structure and frame shear structure buildings
 B. Partition in general civil and steel structure building
 C. Wall panels, insulation wall block, window sill, etc.
 D. Any interval at the large space building
 E. Sound insulation wall at KTV room and movie theater
 F. Fire-resistent partition, basement damp proof wall
 G. Old building facade renovation, interior wall spacing, kitchen and toilet partition, etc