الوصف
Our
enterprise offers uniquely high-quality coating services. The
plant boasts own galvanic coating & painting workshop with
extensive capabilities for coating services of any degree of
complexity and depth of coating. Any types of plating and coating
services are available according to buyer's
request.
Galvanic coating & painting workshop offers
electrochemical coating services by galvanizing with
supplementary oxide phosphatization or chromate conversion
coating (passivation) of items produced from low-alloyed steel on
a mechanized production line.
Technical
specifications of a mechanized line:
-
Galvanizing bath – 4 pcs;
-
Phosphatizing (chromate conversion coating) bath – 1 pc
​Dimensions
of the bath:
-
Length – **0 cm;
-
Width – *2 cm;
-
Height – **0 cm;
-
Volume – **0 L.
-
Treatment cycle (for coatings ***2 micron) ≈
*0 min.
All
services are negotiable in pricing and
conditions.
JSC «Dnepropetrovsk Aggregate Plant» provides a range of services
for galvanic and chemical coating of components and parts,
manufactured from structural steels, tool steels and varied
aluminum alloys. The on-site painting workshop offers a wide
opportunity for painting procedures. Sizes, configuration and
masses of coated parts is limited only to the volume
capacity of galvanic baths and drying kilns.
Each stage of galvanic coating and paint coating process is
subject to continuous process control on the part of quality
management specialists, using special-purpose equipment –
thickness gauges, micrometers, etc.
Galvanic workshop of the plant
wields extensive capacities employable for the following coating
technological processes:
Electrochemical zinc
plating (galvanizing) with supplementary oxide
phosphatization or chromate conversion coating (passivation) of
low-alloyed steels on the mechanized coating
line. Workpiece/component dimensions: by weight – not more
than *0 kg, by length – not more than
0,6 m. ​​​​
Cadmium
plating. Workpiece/component dimensions: by weight –
not more than 5 kg, by length – not more than
0,6 m.
Copper
plating. Workpiece/component dimensions: by
weight – not more than 3 kg, by length –
not more than 0,6 m.
Tin plating
(stationary). Workpiece/component dimensions:
by weight –not more than 5 kg, by length – not more than 0,6
m.
Tin plating
(chamber-charging), intended for coating of
small-size components with Ø not less than
5 mm.
Chrome
plating. Workpiece/component dimensions: by
weight – not more than *0 kg, by length –
not more than 1,0 m.
Chemical nickel
plating. Workpiece/component dimensions:
by weight – not more than 3 kg, by
length – not more than 0,7 m., by width
– not more than 0.3 m.
Chemical
phosphating. Workpiece/component
dimensions: by weight – not more than
5 kg, by length – not more than
1,0 m.
Anodic
coating (chromic acid anodizing, sulfuric
acid anodizing, hard anodizing). Workpiece/component
dimensions: by weight – not more than 3 kg, by
length – not more than 0,7 m., by
width – not more than 0.6 m.
Silver
plating. Workpiece/component dimensions:
by weight – not more than 3 kg, by
length – not more than 0,*5 m., by width –
not more than 0.3 m.
Component paint
coating. Workpiece/assembly dimensions: by
weight – not more than *0 kg, by height – not
more than 0,6 m., by width – not more than
0.6 m.
| بلد: |
Ukraine |
| نموذج رقم: |
CTN-XXX
|
| سعر فوب: |
1 ~ 1000 / Piece (قابل للتفاوض)
أحصل على آخر سعر
|
| الموقع: |
- |
| سعر الحد الأدنى للطلب: |
1 per Piece |
| الحد الأدني للطلب: |
100 Piece |
| تفاصيل التغليف: |
according to buyer's request |
| موعد التسليم: |
15-90 days |
| القدرة على التوريد: |
100000 Piece per Month |
| نوع الدفع: |
L/C, T/T |
| مجموعة المنتج : |
Services
|
