يبدو أنك لست عضوًا في TradeKey.com بعد. اشترك الآن للتواصل مع أكثر من 7 مليون مستورد ومصدر عالميًا.
انضم الآن ، مجانًا |
Book call on your favorite time
Code
       

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Amazon Services

E1701A Analogue Scanner Controller Card

Germany

-

330 / Piece أحصل على آخر سعر

-

330 per Piece

1 Piece

-

-

-

-

-

الاتصال الآن

مواصفات المنتج

Place of Origin : Germany Scanhead Interface : +-5V/+-10V analog Communication Interface : Ethernet, USB Laser Types : CO2, YAG, Fiber, others Webpage : halaser.eu/e1701a.php

الوصف

E1701A analogue scanner card is a low-cost scanner card with the smallest ground-size and it is the only one which can be extended by additional boards providing different signals and outputs. So it is not necessary to buy one fully featured card and to pay for functions that are not needed. Via its extension boards only these functions and I/Os can be added, that are really required. These extension boards are plugged onto baseboard. Several of them can be combined freely according to required functionality.
 

E1701A is an analogue scanner card which can be extended by options described below and provides following features: 

  • 16 bit analogue interface to scanhead with X and Y channel, ±5V and ±10V output
  • 3x 12 bit additional analogue outputs, 0..5V output
  • ILDA-capable interface
  • USB 2.0 and 100 Mbit Ethernet connection
  • online XY grid correction with support for several correction table file formats (like BeamConstruct HD .bco correction files, SCAPS™ .ucf, Scanlab™ .ctb and .ct5, Raylase™ .gcd, GSI/CTI™ .xml)
  • switching between up to 16 grid correction tables during marking process
  • 10 microseconds vector cycle time and resolution (microstep period)
  • command execution time down to 0,5 microseconds
  • realtime processing of laser and scanner signals
  • 26 bit internal resolution (for better quality also with 16 bit hardware output)
  • can control nearly every laser type
  • can control nearly every laser type (this may require extension boards as described below)
  • two laser CMOS level digital outputs for usage with YAG, CO2, IPG™, SPI™ and compatible laser types (outputs can provide PWM frequency, Q-Switch, FPK-pulse, continuously running frequency, stand-by frequency), running with frequencies up to 20 MHz
  • LP8 8 bit CMOS level parallel digital output e.g. for controlling laser power
  • LP8 latch CMOS level digital output for usage with IPG™ and compatible laser types
  • Master Oscillator CMOS level digital output for usage with IPG™ and compatible laser types
  • 8 bit 0..5V analogue output e.g. for controlling laser power
  • 8 digital s and 8 digital outputs can be switched to opto-insulated mode with external power supply of up to 24 V
  • 2 s can be used for 90 degree phase-shifted encoder signal for marking on-the-fly applications
  • 512 MByte DDR3 RAM
  • 1 GHz CPU clock
  • support for Micro-SD and Micro-SDHC cards
  • internal command and vector data list with more than 20 million entries
  • continuous list concept, no need to swap between buffers
  • BeamConstruct PRO license included
  • open source compatibility library that emulates existing programming interface for fast and easy usage with existing software (contains e.g. Scanlab™ RTC4™, SCAPS™ USC™/SCI and other compatible interfaces)
  • very small size of about 87 mm x 55 mm
  • shipped with easy to use connection kit
  • hardware/firmware is quality made in EU/Germany
E1701A Analogue Scanner Controller Card

اتصل بنا

الشخص الذي يمكن الاتصال به: Michael

الشركة:HALaser Systems

عنوان:Germany,

رقم الهاتف:

عرض رقم الهاتف

إلى,

Michael < HALaser Systems >
أريد أن أعرف:

المزيد من المنتجات من HALaser Systems

E1701D XY2/100 Scanner Controller Card E1701D XY2/100 Scanner