سعر فوب
أحصل على آخر سعر|
- Minimum Order
بلد:
Netherlands
نموذج رقم:
-
سعر فوب:
الموقع:
-
سعر الحد الأدنى للطلب:
-
الحد الأدني للطلب:
-
تفاصيل التغليف:
-
موعد التسليم:
-
القدرة على التوريد:
-
نوع الدفع:
-
مجموعة المنتج :
-
Netherlands
الشخص الذي يمكن الاتصال به Mr. Pascal
chroomsteden 2, Enschede, Overijssel
Falling film chiller
These PillowPlate® heat exchangers transfer heat from a thin film
of liquid falling on the outside of the plates. The refrigerant is
passing through the inside of the plates. Cooling of liquids over a
wide temperature difference can easily be achieved. Capacity range:
*0 kW up to ***0 kW.
Falling Film Chillers are very suitable for cooling large amounts of water down to temperatures as low as 0,5ºC without risk of chiller damage from ice.
Falling Film Chillers can handle all kinds of liquids; from
clean water to contaminated liquids with solids. Even moderately
viscous solutions can be chilled economically. Falling Film
Chillers can easily be cleaned, thanks to accessibility from all
sides and space between the evaporator plates. Falling Film
Chillers are suitable for R**7, CO2, glycol and all other Freon
refrigerants.
The chillers cool a thin layer of liquid flowing over both sides of
the pillow shaped plates. The refrigerant is contained inside the
plates.
Applications falling film chiller
• Fresh produce.
• Poultry processing.
• Bakery.
• Food and dairy processing.
• Seafood processing.
• Red meat.
• General food industry.
• Beverages.
• Concrete cooling.
Properties
• Capacity *0 – ***0 kW/unit (for water).
• Cooling of liquids over a wide temperature range
ΔT *0 ºC to 0,5 ºC is possible (by recirculation).
• Heat transfer coefficients up to ***0 W*K/m2
• Large capacity of up to **0 m3/unit.
• Suitable for use with R**7, CO2, glycol and HFC refrigerants.
• Can be made of most types of stainless steel.
Components
Frames are available in designs to meet your specific chilling requirements. All frames are custom-made, this means dimensions can be changed according to your specifications.
Water tanks are available for storage and/or recirculation of water and are available in several designs. The tanks are made out of stainless steel with ****0 mm of polyurethane insulation.
Standard units are constructed of type ***-L stainless steel with a 2B finish. All welds are pickled/passivated or blasted with glass beads. Optional materials are available upon request, including ***-L and SMO***4 as well as others. Optional finishes include electro-polish for ultra-high purity or corrosion applications.
Omega Thermo Products, tailor-made solutions in heat transfer technology
بلد: | Netherlands |
نموذج رقم: | - |
سعر فوب: | أحصل على آخر سعر |
الموقع: | - |
سعر الحد الأدنى للطلب: | - |
الحد الأدني للطلب: | - |
تفاصيل التغليف: | - |
موعد التسليم: | - |
القدرة على التوريد: | - |
نوع الدفع: | - |
مجموعة المنتج : | - |