| Injection Unit Data | æ³¨å°„æ•°æ® | å•ä½ | A | B | C |
| Screw diameter | 螺æ†ç›´å¾„ | mm | 55 | 60 | 65 |
| screw l/d ratio | 螺æ†é•¿å¾„比 | L/D | 23.0 | 21.1 | 19.5 |
| Theoretical shot volume | 注射ç†è®ºå®¹é‡ | ㎤ | 594 | 706 | 829 |
| Shot weight(PS) | 注塑é‡é‡(PS) | g | 524 | 623 | 732 |
| oz | 18.4 | 22.0 | 25.8 | ||
| Injection pressure | 注塑压力 | Mpa | 200 | 168 | 143 |
| Max. Injection rate | 最大注射速率 | ㎤/sec | 209 | 249 | 292 |
| Max.plasticizing capacity | 最大塑化能力 | g/sec | 36.5 | 46.5 | 52.0 |
| Max. Screw RPM | 最大螺æ†è½¬é€Ÿ | rpm | 157.0 | ||
| The injection stroke | 注射行程 | mm | 250 | ||
| Clamping Unit Data | é”æ¨¡æ•°æ® | å•ä½ | |||
| Clamping force | åˆæ¨¡åŠ› | KN | 2780 | ||
| Mold opening stroke | 移模行程 | mm | 550 | ||
| Min. mold thickness | 最å°æ¨¡å…·åŽšåº¦ | mm | 200 | ||
| Max. mold thickness | 最大模具厚度 | mm | 600 | ||
| Distance between the tie bar (HxV) | 拉æ†å†…è· | mm | 580×580 | ||
| Ejection force | 顶出力 | KN | 70 | ||
| Ejection stroke | 顶出行程 | mm | 150 | ||
| General Data | å…¶å®ƒæ•°æ® | å•ä½ | |||
| Barrel heater capacity | 电çƒåŠŸçŽ‡ | Kw | 15.6 | ||
| Heating section | åŠ çƒæ®µ | 4+1 | |||
| Electric motor capacity | 电机功率 | Kw | |||
| Oil tank capacity | æ²¹ç®±å®¹é‡ | â„“ | 400 | ||
| Dimensions of machine (LxWxH) | 外形尺寸 | m | 5.98*1.66*2.37 | ||
| Hydraulic system pressure | 油压系统压力 | Mpa | 16 | ||
| Weight of machine | 机器é‡é‡ | ton | 7.81 | ||
الشخص الذي يمكن الاتصال به: zhang
الشركة:Ningbo haode international trading Co, Ltd
عنوان:Ningbo, Zhejiang, China,
رقم الهاتف:
عرض رقم الهاتف
التليفون المحمول:
عرض رقم الجوال
HRL538S Injection Molding
HRL 308 injection molding
HRL 128S injection molding
A4V hydraulic pump
mono solar moudle 380W
balance car
HRL108S Injection Molding
HRL178S injection molding
HRL 408 injection molding
HRL 158S injection molding
small excavator 2030
Electric Forklift Truck