الوصف
MBR(Membrane Bioreactor) is a combined process of membrane
separation and biological technology for MBR system wastewater
treatment.
Product Specification
Membrane Area: *5,*0,*5,*0,*5,*0..
Material: PVDF (reinforced)
Poresize: 0.*3 or 0.*8μm
Fiber Diameter: ID/OD=0.9/2.0mm
Turbidity: 0.5~2NTU
PRODUCT DETAIL OF MEMBRANE FOR MBR SYSTEM WASTEWATER
TREATMENT
Membrane bioreactor MBR sewage treatment - membrane filtration
technology has advanced significantly in the past *0 years for both
water purification and wastewater treatment. Today, membrane-based
systems have become the preferred technology for most of the water
purification and wastewater treatment applications: cod, bod
removal, Cryptosporidium and Giardia control, color or suspended
solids removal, etc.
The combination of membranes with the activated sludge process
has redefined the basic sewage & wastewater treatment approach,
optimizing the biological treatment operation and yielding a
treated effluent that is ideal for reuse. Key advances in membrane
technology are at the leading edge of this trend:
Uncoupling HRT and SRT
A significant advantage of the membrane bioreactor process of
we these MBR membrane manufacturers is that the sludge solids are
completely retained in the bioreactor. This means the solids
retention time (SRT) in the bioreactor can be completely controlled
separately from the hydraulic retention time (HRT).
This is different from the CAS process, where the flocculant
solids that make up the biomass have to be allowed to grow in size
to the point where they can be settled out in the secondary
clarifier. In a CAS, the HRT and SRT are therefore coupled, since
the floc size and thus its settlability relate to the HRT.
High-quality effluent
Membrane's pore size (0.*3 or 0.1 µm) ensures that the
treated effluent is of very high clarity and significantly reduced
pathogen concentration. MBR processes provide a substantially
clarified and disinfected effluent of high enough quality to be
discharged to sensitive receiving bodies or to be reclaimed for
applications such as urban irrigation, utilities or toilet
flushing.
Small footprint for MBR sewage
treatment
The retention of the solids and the increase in SRT to
generate higher biomass solids concentrations also impacts on the
plant footprint. The increased concentrations mean that the same
total mass of solids is contained in a smaller volume, such that
the footprint is smaller.
Better MBR system wastewater treatment
Lastly, longer solids retention times tend to provide better
biotreatment overall. The conditions encourage the development of
the slower-growing microorganisms, specifically nitrifiers. MBRs
are especially effective at the biological removal of ammonia
(nitrification).
Automatic simplest operation
A sewage treatment plant/wastewater treatment plant with MBR
can be run continuously with a PLC control system. To get the
simplest operation. We have launched a standard SIEMENS PLC system
and SCADA System and SMS alarm etc. You can control and monitor the
system anywhere and anytime only with an internet service.
TYPICAL SPECIFICATION OF OUR MBR ELEMENTS
ITEMS
|
MBR**2
|
MBR**5
|
MBR**0
|
MBR**5
|
MBR**0
|
MBR**5
|
Standard filter area(m2)
|
*2
|
*5
|
*0
|
*5
|
*0
|
*5
|
Design Flow (L/h.m2)
|
****0L/m2.h
|
Recommended Flow (m3/day)
|
2.**3.5
|
3.**4.5
|
4.**6.0
|
6.**7.5
|
6.**9.0
|
***0.5
|
Dimensions (mm)
|
***0x**5x*0
|
***0x**5x*0
|
***0x**5x*0
|
***0x**5x*0
|
***0x**5x*0
|
***0x**0x*5
|
***0x**0x*5
|
***0x**0x*5
|
***0x**0x*5
|
***0x**0x*5
|
***0x**0x*5
|
Material of Membrane
|
Reinforced PVDF (Polyvinylidene fluoride) hollow fiber
|
Diameter of Hollow fiber
|
ID/OD=0.9/2.0mm or 1.0/2.4mm
|
Longitudinal Breaking force
|
> **0N
|
Filtering Path
|
Outside-In, discontinuous filtering + continuous air scouring
|
Pore Size (μm)
|
A: 0.*8~0.1um, B: 0.*2~0.*4μm
|
Permeate Turbidity
|
≦0.5 NTU
|
Temperature
|
***0℃
|
PH
|
2~*0
|
Max.Operating Negative Pressure
|
*0.*6Mpa
|
Recommended Negative Pressure
|
*0.*1 to *0.*3 Mpa
|
Recommended Backwash flow
|
****0L/m2.h
|
Recommended Backwash Pressure
|
0.**0.*5Mpa
|
Continuous chlorine resistant
|
**0ppm
|
Discontinuous chlorine resistant
|
**0ppm
|
بلد: |
China |
نموذج رقم: |
MBR10, MBR12, MBR15, MBR20, MBR25
|
سعر فوب: |
150 ~ 425 / (قابل للتفاوض)
أحصل على آخر سعر
|
الموقع: |
China |
سعر الحد الأدنى للطلب: |
150 |
الحد الأدني للطلب: |
1 |
تفاصيل التغليف: |
Carton |
موعد التسليم: |
5-7 days. FOB ports: GuangZhou/Shenzhen |
القدرة على التوريد: |
- |
نوع الدفع: |
T/T |
مجموعة المنتج : |
Haike
|