Guangdong Wanlian Packaging Machinery CO., LTD

1.Each of the glue rolls controlled by separate transducer motor to ensures all rolls run with same pace, also

1.The invert motor drive the blade to slit. 2.Scorer wheels are divided into two groups, each of which are co

1. The arms of the roll stand up and down, open colose and left right, hydraulic controlled. 2.Equip with ac

1. Each slitter and scorer is controlled by electric sensor 2.There are three types for scorings, conves to c

1.Transducer adjusts the capacity of wind, and control the tension 2.With PLC automatically control and keep

1.The whole semi-automatic stacker inculdes three sections TECHNICAL PARAMETER tacking Length Over **0mm S

1. The cylinder circumgyrate to enhance the heat 2.The surface of the cylinder experienced grinding and polis

1.convenient to inspect and stack board with *0turnaround electric roller output. 2.transverse expulsion of p

1. Each of the glue rolls controlled by separate transducer motor to ensures all rolls run with same pace, als

1.Module Installation 2.The frame of the machine use the circle seal structure. 3.Flute roll under pressure

1.Paper roll:two per set, one fixed rolls, and the other floating rolls can adjust almost at **0bound any wrap

1.The cylinder circumgyrate to enhance the heat 2.The surface of the cylinder experienced grinding and pol

1. Thin blade 2.The oil cooling to ensure the paperboard lined and perfect, blade work long. 3.New blade cut

Adopt imported servo drive system; Double Drive ensure the stability of machine running at high s

1.Torque Motor is applied as the main drive motor, lower currency and stronger output torque, much lower in po

1.The mahcine configures with two groups of scorer 2.All scorer wheels are with power to enhance the Cardboar

1. Adopt imported servo motor; 2.Adopt imported AC servo control system; 3. Keep speed stable while length o

1.Max cutting length: ***9mm 2.Separate oil pump feed the oil and lubricate the bearing. 3.This type of Cut-

1.Fingerless blower type single facer, the upper and lower corrugated roller made of Cr-Mo alloy steel. 2.Glu

1.Separate oil pump feed the oil and lubricate the bearing. 2.This type of Cut-off just consume the one of t

1.Keep speed stable while length of order is changeable; 2.Design speed **0m/min 3. This type of Cut-off sto