Description

Model TARGE***2 Tube Diameter *****0mm Length of strip *******0mm Thickness of Material 0.**5mm Width of Material *5—*0mm Strip Speed 1—2m/min Numerical Controlling System PLC Controlling System Main Motor Power 2.5KW Weight **0Kg Dimension Size ***0****0****0 mm Processing Procedure 1. Method of Glue water Mixture: Stir catalyzer, glue water and thinner evenly, at the rate of 1&#****6;*0&#****6;*0, then fill it in the material trough. 2. Feeds: Fill the glue water where the roller can touch it. 3.Baking: Firstly, adjust the temperature up to ****0 &#***1; before starting the machine, and when the temperature shown in the thermometer reaches to *0 &#***1;, readjust t it to about *5&#***1;, then start the machine. 4. Starting the machine: (1)Place the die to the machine head and fix it, then install the driving belt, and adjust the die. (2)Have the aluminum foil pass through the adhesive roller and drier, then start the machine; (3)Wrap the aluminum foil strip with steel wires, then weight it with heating installment, and adjust the rotating speed. 5. Quality Inspection: (1) Check whether the interval of the formed aluminum strip is the same. (2)Check whether there are steel wires out at both cosmetic and inner parts.