Description

Ultra-high molecular weight polyethylene( UHMWPE )is an outstanding engineering ***** characterized by the following properties. FEATURESï&frac*4;š (1)Very high abrasion resistance (2)Very high impact strength (3)Very low coefficient friction (4)Good self-lubricant (5)Excellent resistance to chemicals (6)Good resistance to low temperature. (7)Excellent dielectric properties UHMWPE SHEET Size ***0X***0mm ; ***0X***0mm ; ***0X***0mm ***0X***0mm ; ***0X***0mm ; ***0X***0mm Thickness 6.5~**0mm UHMWPE PIPES Size ODï&frac*4;š*2~**0mm X IDï&frac*4;š*9~**0mm Wall thickness 3.0~*7.2mm UHMWPE FILM Width (mm) *0, **0~**0 Length (meter/roll) *0~**0 meter/roll Thickness (mm) 0.**0/0.**5/0.1/0.*5 /0.2/0.3/~1.5 Tolerance <0.5 mm thickness 1.0~1.5mm thickness UHMWPE BAR Diameter (mm) *5 *0 *0 *0 Roundness (mm) ≤3 ≤3 ≤3 ≤3 Length (mm) ***0 ***0 ***0 ***0 Diameter (mm) *0 *0 *0 **0 Roundness (mm) ≤5 ≤5 ≤5 ≤6 Length (mm) ***0 ***0 ***0 ***0 Diameter (mm) **0 **0 **0 **0 Roundness (mm) ≤6 ≤6 ≤6 ≤6 Length (mm) ***0 ***0 ***0 ***0 Diameter (mm) **0 **0 **0 **0 Roundness (mm) ≤6 ≤6 ≤6 ≤6 Length (mm) **0 **0 **0 **0 Diameter (mm) **0 **0 **0 ***0~***0 Roundness (mm) ≤6 ≤6 ≤6 ≤6 Length (mm) **0 **0 **0 **0 Typical technical specification Density 0.**5~0.**0 gram/m3 Hardness *0~*8 Water adsorption <0.*1% Abrasion ratio 0.*7 Friction coefficient 0.*7~0.*1 NOTCH impact strength *0 ~ **0 KJ/M2 IZOD Impact strength No break Tensile strength *0~*5 Mpa Break elongation **0~**0% ANTISTATIC UHMWPE Density 0.*4~0.*8g/cm3 Tensile strength *4 Mpa Elongation **0% Izod impact strength No break Hardness *0~*8 Coefficient of linear thermal expansion 1/K:2X***4 Surface resistivity **4 ~**9 Ω-cm