Modern heating and domestic water installation

Description

The KAN-therm Push system consists of the high quality polyethylene pipes, PPSU or brass fittings and brass sliding sleeve. PPSU fittings made from fenylen polysulfon (PPSU), are lighter and more durable than metal. Tight and sure connections in the KAN-therm Push system are made by clamping a brass sliding sleeve on a pipe and fitting. These connections are self-sealing. It is no need to use other seals (o-ring, Teflon tape and tow. In the KAN-therm Push system we use PE-Xc or PE-RT polyethylene pipes. Pipes and fittings available in the diameters Ø*4 to Ø*2mm and can be widely used in sanitary. The ease installing our system has been achieved thanks to universal and handy tools. Besides, systems can be joined with different installation systems. The KAN-therm Push installations can be hidden in floors and partitions of constructions. The KAN-therm Push system can be also joined with the help of screwed connections especially in the buildings renovation where piping under plaster is impossible. KAN-therm Push supplement: mounting accessories, manifolds and mounted cabinets. The KAN-therm Push System, because of perfect design of its elements and their mutual matching, provides: - over **-year-long life, - high temperature operation - Twork = *0°C (working), Tmax = *0°C (maximum, heat source should have a safety device against temperature rise above that value) and 6 bar working pressure for pipes with EVOH layer, and *0 bar for pipes without EVOH layer, - extremely durable PPSU joints whose maximum operation parameters are limited by pipe durability, - **0% corrosion free regardless of water quality. With the KAN-therm Push System you can execute hot and cold water installations and central heating installation through distributing systems: - traditional, - with manifolds, - with tees in parquets, - with wallplates (hot potable water and cold water), - horizontal loop (central heating), - single pipe set (central heating)