Description

On account of using this equipment can pour continually. Its producing efficiency is largely higher than disc polyurethane injection machine . Main technical guide line : Mould frame working posting pcs &#****8;*****0 Adjusting range of mould frame’s operating line speed n/min ***2 Adjusting range of drying tunnel operating temperature &#***1; Room temperature**0&#***1; Equality difference of drying tunnel working time 8 Introduction of every constituent parts Molding production line is composed of conveyor base, catena type of infinitely variable speed adjusting system, burning machine (only used for oil heating), processed drying tunnel of runnel type, mould working table and electrical controlling device 1. For the purpose of convenient transitions, conveyor’s machine base is assembled by good quality steel and is disassemble. There are idler wheel fixed on machine base to support gyration of mould working table 2. Because of polyurethane sole’s size and shape complexity is different. Also the product processed is different. So the catena driving setup adopt stepless adjusting to change moving speed of mould working table. 3. Upper-link shoe or sole mould is fixed on mould working table. If for making upper-link shoe product, every mould working table can emplace one shoe mould. Its working table size is **0mm×**0mm ; If for making sole, every mould working table size is **0mm × **0mm ; The max height of shoe mould is **0mm 4. When mixtured material had been poured into mould, covered mould will run into drying tunnel type processing tunnel. The section length is 2 meters, consisted by 7 sections (or more than 7 sections). When the mould come out of tunnel, mould can be opened and product can be taken out 5. According to the resource price of customer’s locus, the heating way of this equipment are electricity and fuel. The electricity way adopts electricity thread to heat. The fuel way adopts specialized burning machine.