Description

We can manafacture crumb rubber to custom specifications and we have some standard grades: TS********0 is a **4mm product used in moulding, playgrounds and soil improvement. Supplied in either bulk bags or *0kg sacks TS********0 is a **5mm product used in sports pitches below the surface. Due to the low level of dust in our product we have an improved bulk density over competing products which can reduce the quantity of rubber needed per pitch. Supplied in either bulk bags or *0kg sacks TS *******0 is a **2mm product used in the top surface of sports pitches. Once again due to the low levels of dust in our product we are told that it can reduce the amount of rubber needed in the carpet by between *0 and *0%. Supplied in either bulk bags or *0kg sacks TB******0 is a grade used in bitumen as a plasticiser and also in asphalt. Supplied in bulk bags mainly though it can be supplied in sacks or pre-weighed low melt pouches. TB******0 is an increased quality grade product used in asphalt, rubber compounds, plastic compounds and tyres. This can be supplied in bulk bags, sacks or pre-weighed low melt pouches. TB****0 an extremely high quality very fine powder mainly used in rubber and plastics. This can be supplied in bulk bags, sacks or pre-weighed low melt pouches. TGA analysis is available on supplied product if required and we typically expect: Acetone extractables to be around 7.5% Ash content to be >8% though usually around 5.**6% Rubber hydrocarbons around *8% Carbon Black around *7%.2 Bulk density varies from product to product depending on particle size range. Most of our products follow the same pattern of analysis as above but please note that the sub **0 micron ultra fine powder has a slightly increased ash % and slightly decreased polymer %. Although all our products are from the same rubber, the process creates this slight anomaly.