Description

Solar Crystal Crystal design, Architectural stud Model No.: RSPS**-T (one way) RSPS**-T (two ways) Key features: Technical features: Item Description Solar cell Type Mono crystalline Voltage 4V Current *5MA Battery Type Heat-resistance Ni-MH Voltage 2.4V Capacity **0MAH(Flash) **0Mah(steady) Circle life ***0 circle(over 3 year) Work temperature **0~**0 LED frequency 1Hz or steady Size Φ8mm Number 2*6PCS Color White, yellow, red, blue, green Flash way Blink or steady Luminous intensity *********0mcd Control circuits IC Size: *9***4**0mm Operating time (single-side) charged in the sun for 8 hours available for *5 hours&#**9; blinking lighting and *5 hours&#**9; constant lighting Compression resistance over *0 Ton Starting intensity **0 LUX Application situation Edge line Life in use 3 year Warrant 1year Material of body shell: PC Material of body inside Epoxy glue Water proof IP*8 View distance: Over **0m Weight: 0.**2kg Packing: In carton. *0PCS/carton, Carton size: *8**8**8cm, ****0PCS/*0FT container MOQ: **0PCS Installation Procedure: 1. Check if the solar stud charge and discharge in normal way; 2. Identify the place and distance for installation and clean road surface; 3. Clean the bottom of the solar stud and stick it onto the road surface; 4. Steady it with two screws if road condition is bad such as sandy road. 5. Don&#**9;t put them into use till 4 hours later when they are completely dry. Caution: ONLY USED ON THE EDGE LINE.