Split Solar Water Heaters

Description

The split solar water heating is an active system, because it uses a pump with a controller to circulate the fluid between the heat pipe series solar collector and the storage tank, tank and solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can installed anywhere of the building. The piping between the main components is made of brass and a special insulation with high temperature resistance for solar systems. An Once Heat-exchange System is suit for climates where there is no risk of freezing. The Recirculation feature in the controller can provide recirculation freeze protection. An Open Loop Water Heating System provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with existing systems. The main components of split solar water heating: 1), Solar collector 2). Solar workstation including:circulation pump, intelligent solar controller with sensors, connector, and pressurized tank from **0L to **0L. Advantages of Split Solar Water Heating: 1). No disorder water tank on your roof 2). Split solar water heating systems is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house, which can be Integrated in to the roof of the building perfectly. 3. The perfect collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc. 4. There have an auxiliary heating device*-electric heater booster in the tank, so providing hot water in case of cloudy or rainy days, you will no need to worry 5). No water inside the tube