Description

Specifications: 1) Heat pipe vacuum tube solar collector 2) Wilo hot water pump (RS*5/6) 3) Three sensors differential controller 4) Stainless steel pressure storage tank with one coil exchanger 5) Air vent 6) Electric booster: 1.5kW 7) Expansion tank 8) Pressure gauge 9) Filling and flushing valve *0) P/T valve *1) One way valve *2) Magnetic anode *3) Vacuum valve Features: 1) Collector separates with the storage tank. The tank can be put anywhere in the house 2) The collector can be put on the inclined roof or flat place 3) Module design, arbitrary combination, harmonious with the building perfectly 4) Intelligent control and automatic operation 5) Anti-freezing: no water inside the tubes when it works 6) The system controller has the anti-freezing function that the temperaturecirculation will operate while it reaches the fixed temperature 7) Multifunction: bathing, washing, domestic heating 8) Workable at anytime and enjoyable Working principle: 1) When the temperature of the heat collector reaches the set value, the controller shall start the circulation pump automatically 2) The circulation pump makes heat-conducting liquid circulate automatically 3) The heat-conducting liquid transfers heat to water by heat exchanger in the water tank 4) In case the temperature of the water tank does not reach Tmax, then start the auxiliary heating device 5) In case the temperature of the circulation pump does not reach the set value, the circulation pump shall be shut down automatically