Description

Product explanation: This machine was strictly designed and manufactured to meet the requirements of UL***1、ASTM D***5 and ASTM D***7 standards. It is used to test the resistance on fire of cable, wire and other insulation material. This test is specified in UL***1 as ‘Flame tests’. Features: * This machine can record the burn time and finish experiment automatically. * It can open and close the exhaust system automatically. * Both FT and VW test can be performed by this machine. * A big window in the door makes viewing more convenient, and you can check the samples by two gloves . * Flame calibrating system is available. * Controled by PLC, and the touch-screen makes your operation more convenient and simple. * The blowtorch is made in USA. * The flowmeter is made in Japan. Technical parameter: Power source: AC **0v *0Hz 3A. The interior capacity:4.5 m3. The capacity above the flame:2 m3. The inner diameter of blowtorch:9.5±0.3 mm. The blowtorch angle: **0 or incline **0 Gas:firedamp(at least *8.0percent pure, provided by clients). Clamps:3 sets. Burning times:0~**9 times adjustable. Burning times precision:±1time. Burning period:0~**9.9 s(standard requires *5s). Fire OFF period:0~**9.9s(standard requires *5s). Cable on fire timer:0~**9.9s(controled by button and displayed by touch-screen). Flame calibrating time:*4s±2s or *4s±2s(UL standard requires flame temperature must be rised from ***0C to ***0C in *4s±2s). The measuring range of flowmeter:0~***0ml/min. Flowmeter precision:2%. Flame height (VW*1 and FT*1):**5 mm. Flame height (FT*2):*0 mm. Thermocouple temperature:0~****0C. Exhaust system power: compressed air with 0.4 to 0.6Mpa. Exterior dimensions:***0×***0×***0 mm(W×D×H) Contact info: contact person:Mr david siao email:*****