Description

The high speed injection molding machine is designed for producing pp material disposable plastic containers thin wall containers. According to lots of our customers’ feedback from Australia , Zhe jiang province and Guang dong province, the machine has high speed , high efficiency , low defective rate and a good stability. When the machine is in a work condition, the injection speed can reach **0MM/S, and the cycle time is about from 2.2 second to 3 seconds.( refer to the catalogue). During the actual production process, the cycle time will be a little longer than this , according to the demould of the products from the mould. Currently the cycle time of the HDF **0 high speed injection molding machine is as follows: Two cavities per mould (for container’s cover) 4.6 seconds / mould One cavity per mould (for **0 ML square snack box) 3.4 seconds/mould One cavity per mould (for **0ML square snack box) 3.5seconds/mould One cavity per mould(for ***0ML Square snack box) 3.*5seconds/mould The **0ML box’s weight is *7.5 gram, the **0ML box’s weight is *8.5 gram, and the ***0ML box’s weight is *0 gram. The cycle time of the HDF **0 high speed injection molding machine is : Two cavities per mould (for **0ML square snack box) 4.8 seconds/ mould TWO cavity per mould (for **0 ML square snack box) 4.8seconds/mould The above plastic containers are all made of pp material , the wall thickness is 0.4 MM, and use air blowing for the product demould.