Description

General *Discrete, patient prioritized, totally open, Automated Clinical Chemistry Analyzer *Photometric Throughput – minimum **0 tests per hour *End points, rate reactions, fixed time, differential, sample blanking, mono and Bichromatic measurements; all programmes operator definable. *On board Chemistries – *0; Sample *Sample positions *0 *can accept primary tubes as well as sample cups *STAT sample be introduced at any time and at any position * sample volume (1.0 – **0ul) in increments of 0.1ul Reagent *Reagent positions *0 *Reagent bottles *0ml for R1; *0/*5ml for R2 *Pipettor with liquid level sensor *Reaction volume (between **0 – **0ul); suggested between **0 – **0ul *Reaction time (0 – **9 seconds) *Facility to run ONLY reagent blank (without standard) in calibration mode *Presence of on board reagent inventory Reaction Module **0 permanent PP, reaction cuvettes; (quartz glass cuvettes available as option) *Reaction temperature *7± 0.1°C (dry air incubation) *High speed Teflon coated mixing probe for efficient mixing of reaction mixture Washing *8 – channel washing manifold; washing with warm water (water heater provided) *Maximum *0 litres for **0 tests (per hour)