Sell Alu-Tit compound coupling agent FT-3

Description

Alu-Tit coupling agent FT*3 Technical criteria Appearance:White and yellow do not dissolve in water solid cerous. Melting Time(**0):≤3min Activation Temperature():*****0 Toxicity:LD*0>***0mg/kg Temperature of thermal decomposition():**0 Application spectrum Substrate resin: PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates and other thermoplastic, thermosetting resins as well as elastic bodies. Inorganic fillers: talcum powder, mica powder, titanium pigment, wollastonite powder, carbon black, iron red, chrome yellow, antimony trioxide, ammonium polyphosphate, barium metaborate etc. Property This product is stable, light-colored, nontoxic, odorless, with high cooperative stability, lubrication, low additive dosage and no need for dilution. This product can greatly promote the filling volume of inorganic fillings in resin (plastics, rubbers, coatings etc.). Moreover, it can significantly improve the tensile strength, impact strength, elongation at break etc., and lower systematic viscosity, improve processing performance, and lower energy consumption and manufacturing cost. Usage and dosage Pretreatment method:Coupling agent of measurement are baches or one time be into the high-speed mixer, after fillers dry and preheating temperature, **0 to **0, and remove *****, speed mixer about 5min and rapid cooling. Direct method:Coupling agent which can put into high-speed mixer directly, if fillers water less than 0.5%.Filler, coupling agent and small amount of plasticizer be injected first, and then inject other component, and mixer in accordance with technology. Other usage: According to the actual situation, usager can inject solvent and other aids are used