Sell wireless remote control switch

Description

EXPLAINï&frac*4;š *******************************************************************************- KL***3 Power AC**0V/DC***2V Static Power <0.5w Concentration of 0.**1% gas alarm voltage: AC**0V - **0V Load power: *0 ~ **0W Remote control distance: *0M Operating frequency: **3MHz Ambient temperature: **5 ~ *0 ℃ Products: Fixed encoding, one-to-one matching, brightness memories for a long time can be adjusted according to light, according to the rapid on / off, apply to incandescent lamps, dimming scenes; connection mode to "single-system" switching power grid automatic protection system to avoid self-starting, low temperature rise of the remote control switch, available light protection, energy security, the use of wireless coding technology, non-directional, non-interference between switches. Medium for detection of natural gas, liquefied gas, gas Way normally closed alarm output Made in response to time of *0s one. Product Feature 1. Choose a different probe, can detect a wide range of flammable gases. 2. The use of imported gas sensors, have good stability and sensitivity working 3.LED instructions and easy to use. 4. can provide switch output, pulse output, the RF signal output, automatic exhaust fan and electromagnetic valve. 5. live sound and light alarm, wireless alarm cable compatible. II. Technical parameters 1. Operating current: AC**0V AC static power consumption <2.5W 2. Chassis material: ABS flame retardant 3. Sensor life:> 7 years 4. Alarm concentration: 0.**0.3% natural gas :0.**0.5% liquefied petroleum gas: 0.**0.3% 5. firing frequency: **5MHz - **3MHz 6. launch distance: **0m (open空阔to) 7. the working environment temperature: **0 ~ *0 ℃ Relative humidity: <*5% 8. alarm volume :> *0dp 9. switch the volume control voltage: AC**0V - **0V Load power: *0 ~ **0W Remote control distance: *0M Operating frequency: **3MHz Ambient temperature: **5 ~ *0 ℃ Products: Fixed encoding, one-to-one matching, brightness memories for a long time can be adjusted according to light, according to the rapid on / off, apply to incandescent lamps, dimming scenes; connection mode to "single-system" switching power grid automatic protection system to avoid self-starting, low temperature rise of the remote control switch, available light protection, energy security, the use of wireless coding technology, non-directional, non-interference between switches. Interface: Next row fan **0V AC (**0V outlet on the switch should be in the "OFF" position) *0. Pulse Control Interface: Access *2V solenoid valve *1. Overall dimensions: **5 * *0 * *0mm ***0 `c ambient temperature operating voltage DC9V Static Power <0.5w *0uA quiescent current Smoke alarm concentration> *0% Firing frequency ******3MHZ Fired from **0M ***0 `c ambient temperature operating voltage DC9V Static Power <0.5w *0uA quiescent current Smoke alarm concentration> *0% Firing frequency ******3MHZ Fired from **0M Ambient temperature ***0 `c Made in response to time of *0s one, function and characteristics of 1 using digital coding techniques, each switch their independence, not to interfere with each other; 2 At the same time compatible with manual and remote operation, manual touch of the trigger, remote control without direction; 3 in accordance with the practice of the International Electrotechnical design, installation, wiring, wall switches with the same general machinery, equipment does not need another zero line. 4 applies to all kinds of lamps and electrical appliances; 5 remote switches and remote control of code used to learn. Allocation by up to four remote controls, and a remote control can also fit a number of remote control switch; Third, learning (of code) set 1 remote control and power switch connected to lamp *0 seconds later, press and hold a remote control switch of a button lights up and then release that entered the study status of the remote control switch. 2 Press the remote control button is a light blinking twice that of the remote control switch and remote control button that corresponds to a study (of code) have been successful. Otherwise, these steps should be re-learning. 3 2 remote control switch when the second study, by holding down the remote control switch should be the second button lights up, let go, and then press another button remote control, two flashing lights that the remote control buttons and remote control switch the second study (of code) have been successful. Three learning remote control switches and so on. 4 *2 key and *5 key remote control remote control key for the final key to the overall learning approach is to hold down the button of a remote control switch, (2 remote control switch remote control switch left or the middle of the three button) lights up to let go , and then press the remote control light flashing the total key twice to learn that the key to the success of the total. If the key used as an ordinary key, remote control switch will not be able to learn of the specified key bit. Specific learning methods with the same first three. 5 by the method with a remote control is a remote control for each additional repeat the above steps, up to four remote controls to learn, more than four, the first be deleted. Fourth, methods of operation A manual control switch on the touch of a button, the corresponding lights, the lights out again. 2 remote control by pressing a remote control button, then the corresponding lights, the lights out again. Pressing the total key, the body of the street. V. Specifications Rated Voltage: **0V ~ **0V ± *0% V *0 ~ *0HZ (custom-made according to customer requirements) Single maximum load: **0W (resistor type) **0W (Inductive) Remote distance :****0 meters Standby power consumption: ≤ 0.*5W Φ**6 * *8  size Made in response to time of *0s Φ**6 * *8  size Size **5 * *0 * *2