integrated pressure solar water heater

Description

This type of solar water heater provides mains pressure pre-heating via a highly effective copper coil heat exchanger located with the solar collector tank. Rather than using the water in the tank directly, as the non pressure does, this type uses a ****0m copper coil. Heat exchanger inside the tank which provides more than 1.5m2 of heat transfer area. When water flows into the copper coil, it absorbs heat from the water in the tank, therefore; the water tank is just a heating storage. Copper Coil Heat Exchange Specification Material *4mm*1.0mm copper pipe Surface Area 2.5m2 for *0 tubes water heater Testing Pressure 1.0 MPa Net weight *5kg for *0 tube water heater . PRODUCT DESCRIPTION Features: ◆Can be used at any time to warm the cold water. It can overcome the shortcoming of traditional solar water heater, such as slow heating rate, long waiting time. ◆High efficiency: A special heat exchanging mode is adopted to avoid mixed effect, so cold water can be heated at any moment. ◆Water pressure is same as tap water; it can be connected directly to city tap water system. ◆Green and economical. No pollution in working, no cost for hot water. ◆Easy operation. Automatic water supply, you can take it easy and enjoy good time. ◆Fashionable. The appearance is nice and attractive and can fit into the surroundings properly. TECHNICAL DATA Vacuum Tube Size ￠*8 x ***0mm/￠*7****0mm Material Borosilicate glass 3.3 Transmittance 0.*2 Coating AL-N/AL Hail Resistance Hailstone diameter Φ*5mm Wind Resistance *0m/s Working Pressure 0.3 MPa Outer Tank Thickness 0.4mm Material Painted Steel Inner Tank Thickness 0.4mm Material Stainless Steel **4 2B(Food Grade) Capacity(liters) *0L***0L Small Tank for Option Thickness 0.4mm Material Painted Steel Frame Material Coated galvanized steel sheet Thickness 1.5mm Insulation Type Imported polyurethane ( from Bayer Germany ) Thickness ****0mm