Description
Place of Origin:Â Guangzhou,
China       Model No:
TOPDRY DESICCANT H***0
Detailed Product Description Introduction:
Â
Desiccant is a dehumidification which absorbs moisture in the air
.
Principle:
During the ocean transport or storage, the big temperature changes
between day and night on the sea make the high-temperature air in
the day full of water saturate because of the falling temperature
at night. As a result, the goods usually experience the marine
high-temperature climate and comparatively big changes of
temperature between day and night which often vary from 0
centigrade to 8 centigrade, with the humidity being able to reach
*8%. This phenomenon is called condensation. The amount of water in
the air is *0.4g/m3, when the temperature is *0 centigrade. When
the temperature drops from *0 centigrade to *0 centigrade, the
amount of water vapor will drop to *5.4g/m3. While the other steam
will condemn to water. This is the usually-called rain in the
container, which has a bad influence on the packing. Therefore, a
certain amount of desiccants should be used to solve this
problem.
Usage:
Container desiccant allows water vapor to enter the interior of the
bag easily, where it is transformed into a thick gel and will not
leak, escape or spill.
Instructions:
   1. Check if there is damage with the
containers, for example, if there is hole or crack at the sides,
top and bottom of containers.
   2. If possible, do not use containers with
the humidity exceeding *0%. Otherwise, it will increase the risks
of getting wet. If the nature of containers can not be changed,
then it is necessary to increase the quantity of desiccants based
in the amount of water contained in containers to ensure the safety
of goods.
   3. Seal all the ventilating holes.
   4.Take out the desiccants from the sealed
plastic bags.
   5. Desiccants can only work in a sealed
environment. If the door of containers does not close well or there
is any damage with the containers or any ventilating hole is not
sealed, then the desiccants will never completely absorb the water
from the outside air.
Packing details:
*4pcs/carton           Â
Product size:
*8**6*2cm         Â
Carton size: *4**9**5cm
Absorption rate: ≥**0% (absorb up to **0% of its own weight for
****0 days when its fully maximize.)
Units needed:
1**0GP:
**8pcs             Â
1**0GP:
****2pcs              Â
1**0HQ: *4pcs
Remarks:
  Usually two pieces of desiccants should be added
accordingly with the 1% increase in humidity for the humidity in
containers exceeding *0%. ONE pieces of desiccants should be added
to the container with the gunny or cotton-made mats. For the
humidity of furniture itself exceeding *8%, an increase of 1% in
humidity should add ONE pieces of desiccants.
   If its products which are made of materials
such as rattan, palm, kelp and so on, then ONE more pieces of
desiccants should be increased.
   If the pallet should be used in the
containers and its humidity exceeds *8%, then ONE more pieces of
desiccants should be added for each increase of 1%.
