Aluminum Honeycomb Panel

Description

Aluminum Honeycomb Panel (1) Brief Introduction The idea beeswax in building the aluminum honeycomb panel is from the honeybee, In the honeybee, in the ***** honeybee uses the least beeswax in building it&#**9;s commodious, steady and firm honeycomb.We compose alumimun honeycomb-core and two aluminum sheets that composite on each side of the core. With special glue and produced light but strong aluminum honeycomb panel . We coated on the outside surface of the sheets. Since the air between the sheets is separated to holes sealed. the propagation of heat and sound wave are greatly restricted. So the panel is good at heat preservation and sound insulation. In the past time the aluminum honeycomb panel is just used in the field of aviation, in recent years with the ship&#**9;s wallboard or partition and so on. The aluminum honeycomb panel of our company is mainly used in the outside and indoor decoration of building, as the partition or wallboard etc. (2)Classily According to the lacquer of coating a.PVDF b.Polyester (3)Specification ***** size unit:mm Length ********0 Width********0 Thickness 6.0, *0.0, *5.0, *0.0, *5.0 ***** u need special specification, plz tell us. ***** specification expression of the panel: Length*Width*Face sheetcoating code and thicknedd(type) Example: Length:***0mm, width:*****:6.0mm.PVDF(FC)coating Code:***0****0*F6.0 Length:***0mm, width:***0mm, thickness:*5.0mm, PET coating Code:***0****0*P*5.0