Description
solar power system ===
Features:
1. Solar powered. No need of oil, gas, or coal, but transferring
sunlight to power. No cost of money but improving life in area
without electricity network.
2. Made of polycrystal (monocrystal) high-efficient solar solar
panel, toughened glass with aluminum frame. Durable, easy for
transportation, and with good appearance
3. Equipped with meter, which tells the status of the system any
time.
4. Easily operable input and output system, requiring no adjustment
for installation.
5. Equipped with maintenance-free storage battery, with production
from over-charge, over-discharge, over-load, and short circuit.
6. 3 output ports at *2V, 1 USB ports at 5.5V/**0nA,and 2 output
ports at **0V/**0V, also with additional external battery terminal,
this machine can offer the power usage to the Home Appliance at DC
*2V/**0V.
7. Quite, small and light, no fear of vibration and dust,
environmental friendly. This system is your first choice of green
power supply where there is no electricity network.
solar power system===>>Technical
Specification:
1. Solar panel: *0W/*0W (polycrystal /
monocrystal)
2. Storage batter capacity: *2V/*4AH
3. Storage batter capacity:
*2V/*4AH
4. Controller capacity: *2V/*0A
5. Operating time capacity: depends on actual
load
6. Operating temperature: **0°C**0°C.
7.
Size:*0CM**0CM**0CM.
8. Main device weight: maincase*0kg.
9. Useful life: ?**0 cycles of full charge and full discharge of
the built-in battery.
*0. Output Interface: 3 ports with output at *2V/5A, 1 USB Port
with output at 5.5v/**0mA, a inner **0W Inverter, 2 ports
with output at **0V/**0V.
Model
|
YUGEF*0W
|
Solar
panel
|
*0W/*8V
|
Controller
|
*2V/5A
|
Battery
|
*2V/*5AH(maintenance free sealed
leadacid storage
battery)
|
Intelligent
control
|
PCBA
|
Output
voltage
|
DC*2.0V/5A(2Pcs)
USB5.5V/**0MA(1Pcs)
AC**0V
|
Size
|
L**0*W**0*H**0mm
|
Weight
|
8kg
|
Panel
Size
|
L**5*W**0*H*5
mm
|
Panel
Weight
|
3.4kg
|
Fully
charge time from solar panel
|
**9
hours
|
Working
time of 3W LED Light
|
*6hours
|
Accessory
|
3Pcs * 3W
LED Bulb and 5m Wire cable
1Pcs *USB
charger connector
|
*0 feet
container
|
**2pcs
|
Solar power
system===>>Operating Instructions:
1. Charging: turn on the switch “power”, place the solar penal
exposed to direct sunlight, insert the plug of the solar penal into
the “solar” socket on the main device. When the charging indicator
light is on, charging is in process. Flashing of the charging
indicator light means charging is completed. Charging from other
electricity source is optional.
2. Using with load: the system has three outputs and protection
from overload and short circuit. The indicator light will be off in
case of overload and short circuit. The light turns on when load is
disconnected. Lifting overload by lowering the actual load will
resume operation of the device. When batter power is low, all
outputs are turned off. Timely recharging resumes operation of the
device and prolongs useful life of the battery. If possible,
connect the main device to solar penal permanently.
3. USB output is 5.5V/**0mA, usable for digital products including
mobile phones. Due to the variety of digital products, please
prepare your own USB connection cables.
4. Please recharge as soon as possible when battery is dead, so as
to maintain adequate power supply. Turn on “power” switch for
recharging.
5. Press “test” button to check remaining power storage at any
time,The Yellow LED flashes means the Power is running low or has
run out.
6. Turn off “power” switch after use.
7. AC usage Instruction: AC and DC are separately output for this
machine, if you want to change to be AC Mode, please turn
on AC power switch, the AC Indication LED will light
on, AC outlet will work, then it is OK to insert AC load. Please
turn off AC power switch if no need.
V.solar power
system===>> Disclaimer and Trouble shooting:
1. Dismantling and modifying without permission are prohibited. Our
company takes no responsibility for any intentional damage or any
damage resulting from the abovementioned prohibited behavior and
improper use.
2. Indicator light if off when solar panel is connected: please
check whether “power” switch is on and whether solar panel is on an
open circuit.
3. Output indicator light is off: please press “test” to check
whether there is enough power storage and recharge if there is not;
in case of no output due to overload or short circuit, disconnect
the load or lowering the load to resume power output.
VI. solar power
system===>>Maintenance
1.Keep upper side of the solar penal clean to ensure full exposure
to sunlight.
2.Protect main device from rain and keep it indoor if possible.
Model Number
|
Solar panel
|
Battery
|
Controller
|
Inverter
|
Led Lamp
|
Output voltage
|
Box weight
|
|
YUGEF*5W
|
*8V *5W
|
*2V *2AH
|
*2V *0A
|
**0W
|
3W*2pcs
|
**0V/*2V/8.4V/5V/3.3V
|
6.*4kg
|
|
|
6.*4kg
|
|
YUGEF*5W
|
*8V *5W
|
*2V *8AH
|
*2V *0A
|
**0W
|
5W*2pcs
|
**0V/*2V/8.4V/5V/3.3V
|
8.8KG
|
|
|
9.3KG
|
|
YUGEF*5W
|
*8V *5W
|
*2V *4AH
|
*2V *0A
|
**0W
|
1W*2pcs
3W*1pcs
|
**0V/*2V/8.4V/5V/3.3V
|
*3.7kg
|
|
|
*4.2kg
|
|
YUGEF*0W
|
*8V *0W
|
*2V *8AH
|
*2V *0A
|
**0W
|
1W*2pcs
|
**0V/*2V/8.4V/5V/3.3V
|
*0.1kg
|
|
|
*0.6kg
|
|
YUGEF**0W
|
*8V
**0W
|
*2V *5AH
|
*2V *0A
|
**0W
|
1W*1pcs
3W*1pcs
5W*2pcs
|
**0V/*2V/8.4V/5V/3.3V
|
*0.3kg
|
|
|
*0.8kg
|
|
YUGEF**0W
|
*8V **0W*2
|
*2V **0AH
|
*2V *0A
|
**0W
|
1W*2pcs
3W*2pcs
5W*2pcs
|
**0V/*4V/*9V/*6V/*2V/8.4V/5V/3.3V
|
*6.5kg
|
|
|
*7kg
|
|
YUGEF**0W
|
*8V **0W*2
|
*2V **0AH
|
*2V *0A
|
**0W
|
1W*2pcs
3W*2pcs
5W*2pcs
|
**0V/*4V/*9V/*6V/*2V/8.4V/5V/3.3V
|
*2.4kg
*2.9kg
|
|
|
|
YUGEF**0W
|
*8V **5W*2
|
*2V **0AH
|
*2V *0A
|
***0W
|
1W*2pcs
3W*2pcs
5W*2pcs
|
**0V/*4V/*9V/*6V/*2V/8.4V/5V/3.3V
|
*3.4KG
|
|
|
*3.9KG
|
|
YUGEF**0W
|
*8V *0W*2
|
*2V **0AH
|
*2V *0A
|
***0W
|
1W*2pcs
3W*2pcs
5W*2pcs
|
**0V/*2V/8.4V/5V/3.3V
|
*9KG
|
|
|
*9.5KG
|
|
YUGEF**0W
|
*8V **0W*3
|
*2V **0AH*2
|
*4V *0A
|
***0W
|
5W*4pcs
|
**0V/*2V/8.4V/5V/3.3V
|
**9kg
|
|
YUGEF**0W
|
*8V***0W*4
|
*2V **0AH*2
|
*4V *0A
|
***0W
|
5W*4pcs
|
**0V/*2V/8.4V/5V/3.3V
|
**8KG
|
Remarks:
1. “A” means with AC charging input(can also be charged by normal
power)
2. Each model is the whole kit including the solar panel,
battery&controller& inverter inside the system case, led
lamp and phone charging unit
3. The inverter-inside design can be charged into inverter-outside
design by using our special built inverter, more convenient for
maintenance.
Shenzhen YUGE Solar-Tech Co Ltd is a company specialized in designing and producing such products as below:
1> small solar Lithium battery systems for home lighting and charging electronic products;
2>Solar energy systems 3W to ****0W
3>Solar LED street lights
4>Solar chargers, solar backpacks and solar chargers.
5>solar panels