Description

1. Uses and Features

   9scj **- **0 model biomass briquette machine briquette enriching Machinery Co. Ltd. of China according to market needs, develop a straw briquetting equipmejongnt with independent intellectual property rights advance design concepts reasonable structure small size strong trial performance high efficiency outstanding features combined with the industry's single module, upgrade the whole ring. It is outside the model since the beginning of the model ring and ring, easy to damage the inner ring model can be used with the anti-exchange can also be rotated within the **0 angle adjustment.9scj **- **0 model biomass briquette machine The mechanical performance to new heights it is for the original moisture requirements and more relaxed, more density biomass shredding machine configuration after the backlog: cotton stalk  branches  bamboo cassava Unqualified garlic skin and other fuels. Corn straw alfalfa bean straw corn straw rice straw cotton leather production of feed a multi-purpose machine. It is the production of feed and fuel the ideal machine.It includes: side cutting conveying mixing compact high-temperature compression molding product output weighing packagin electrical controls and other major parts.

2. The main technical parameters
 (1)Mechanical models of meaning

(2)Production process

Transportation of raw materials Adjust Transport Mix Enter Dense High compression Forming Output Dry cooling The weight Package Finished product warehouse.

(3)Production capacity

**0kg/h

(4)ower and type

(5)Exit section of the module size:
*2mm×*2mm

(6)Product density:
0.**1.2/cm

(7)Products include water
≤*4% (Uncompressed raw moisture should be****0%)(Special materials****0%)

3. Mechanical conditions of use
Contaminated soil materials can not
The length of raw materials should be controlled*0mm**0mm
Material transported to the briquetting machine needs uniform, briquetting machines to ensure a balanced

Briquette after molding high temperature typically *0Celsius**0Celsius Must be cooled to *4Celsius to remove moisture
4. Safety Precautions
Must be read before using the briquetting machine instructions, and follow the requirements for installation, commissioning and maintenance.
Equipment workplace spacious, airy, ready and reliable waterproofing, workplace smoking and open flames.
Boot the machine should be checked before the components are tightened, the device must operate in an empty line.
Operation in abnormal noise, immediately stop the checks, when the device is running against the fault.
Production, strictly prevent mixing iron, stones and other debris, discovered the mouth into the feed block, the disabled and other hands or objects to help fill in the hardwood, it should immediately shut down, maintenance failure.
Operators and other personnel can not stay near the surface around the equipment, the operator is strictly prohibited sick after drinking or fatigue work boot.

5. Installation, adjustment and operation
(1) Installation
Equipment not fixed, as long as it placed in a solid, flat areas can be.
Transport material in place machine, briquetting machine with adjustable coupling mouth position, adjust the paving.
Place electrical control cabinet, connect the import line.
(2) Adjustment
Equipment has been adjusted before leaving the factory test, but also need to check a few below.
Conveyor belt adjustment, or conveyor belt tension is not skew, rotate the transfer roller adjustment bolt tension, belt tension can be enough to solve the problem, or skew. Adjusted parallel to the rear when the attention of the state.
Briquetting machines and ring mold gap should be 0.**1.6mm range, adjust the machine when you first open the front cover, loosen the bolts fastening plate. Turn increase the compression plate comb to reduce the gap wheel and ring mold, adjusted in the ring between the mold and compressed into 3mm*4mm round fuse, turn the wheel spindle to compression pressure in the past, after flattening the thickness of the fuse to adjust the gap, with a vernier caliper or feeler right on the can.
Voltage-cut maneuver to develop knife gap should be controlled within the range 0.**1mm, usually cutting corn stalks and other hard and brittle stems, the most appropriate 0.**1mm gap, cutting straw and other soft forage, the most suitable gap 0.**0.5mm .
(3) Test run
Detailed examination of all parts before running the installation of quality, and whether the omission of machine parts, tools or debris, and manually drive cars, there should be no stagnation.
*-minute stand-alone air operation, check whether all parts of the fault-line running all the normal *0 minutes.
Empty test after passing the test can be found running, gradually add to all the die hole to open the material. Can operate at full capacity. Host device current must not exceed *0A, but must make the current basic stable. Various parts of the unit is operating normally, the sound is not abnormal, but not the part of the fastening bolts are loosening.
6. Care and Maintenance
Check the transmission of each frequency component, the connecting bolts, the most important thing is in touch with the outer ring due to heat and touch the ring gland of the bolts loose, damaged, if problems should immediately tighten, adjust, repair or replacement .
Before work directed in accordance with the provisions of the lubricant into the lubrication points.
Should promptly check briquetting machine roller, pressure roller and the ring touching the gap between the production of *0 tons each examine and adjust the time, shredding machine cut 4 hours continuous voltage check.
Normally the machine should be checked once a year.
Parts and lubrication requirements