Description

NIC-C Color Waterproof Grouts are designed for use in most types of ceramic tile and natural stone applications. It is treated with the exclusive Sanitized biocides, providing effective, lasting protection against mould and mildew. To grout joints between porcelain, ceramic, natural stone and quarry tiles, as well as extruded tiles and glass blockwork. The surface of the hardened grout has a textured finish and is not impervious. FEATURES *****-based water proofing grouting ***** with water, produces a soft, creamy, easily worked mortar with good filling properties, enabling deep joints to be filled in one operation. SURFACE PREPARATION Ensure all loosen materials and droppings are removed from grout joint prior to grouting. For porous tiles such as terracotta, wet the joints before application. COLORS *6 standard colors are available , and other colors is available under client&#**9;s color sample COVERAGE The calculated formular of coverage(kg/m2): *5 X (tile length+tile width) X gap width X gap depth / *3.5 X tile length X tile width (length unit:mm) MIXING 1.Add clean water to buckets, then slowly add the grout powder, stirring continuously until a lump-free consistency is achieved. ***** mixing ratio :Thick filler grouts: *5kg powder: (6~6.5) kg water; Thin filler grouts: *5kg powder: (8.5~9) kg water. 3.Use a rubber trowel to spread tile grout adhesive into the tile joints in a diagonal way and ensure that all joints are properly filled. 4. After about 2 hours of drying, The grout on tile surface should be cleaned with wet sponge or cloth. 5.After *4 hours of drying, The grout haze on tile surface can be cleaned using tile cleaner and water. PRECAUTIONS 1.Do not use acid to clean tiles especially when colour grout is used. 2.Do not use in the rainy condition. 3.Do not use with the temperature of above *0 and below 5. The grout joint should