wireless home alarm system

Description

wireless home alarm system ***** : 1) The main panel supports most of wireless detectors, PIR, magnetic gap detector, infrared balusters, smoking and gas sensors, panic buttons etc. 2) The main panel supports up to *2 wireless alarm zones, wireless detectors are easy to register and use. 3) The main panel could preset 5 groups of alarm phone numbers, and 2 groups of alarm center phone numbers .and dial in turn when alarm is activated. 4) Main panel supports wireless siren, keep sounding when alarming, also send the confirmation sound when the system is armed or disarmed. 5) Users could set the system status(Arm, Disarm etc.) through the remote telephone by dialing the main panel’s number. 6) The main panel has high priority to make the alarm phone call, if the phone is used(not alarming)when the alarm is activated. 7) The main panel could record voice information, this voice would be played to automatically when the alarm phone call is connected. 8) Onsite voice monitor through telephone form long distance. 9) Main panel supports wired siren also, user could connect the wired siren to the main panel. *0) For security reason one password is used for remote access. *1) The main panel could make alarm when it keeps detecting the specified frequency interference for more than 8 seconds. *2) The main panel has anti-decode function, user could set disable the wireless remote controller, then all controllers(include those possibly decoded) could not set the panel. *3) Full keyboard operation . *4) The main panel would send out "*****" alarm beep when the telephone link is absent or destroyed , and the siren would sound when the main panel is armed . *5) The main panel has the backup rechargeable battery , could work *4 hours and auto charge when the power is on , could keep working without losing any information ever the external power supply is down . *6) The user could setup the system status through phone connection anytime . *7) For convenience reason , the main panel have the function of delay arm and delay time of activated alarming . *8) Design for anti-static , anti-thunder , and safe to use . *9) The wireless PIR detector and door/window sensors have the low battery showing light .When the battery of the detector or sensor run out of battery , the light will on . 2. The basic kits of alarm system 1) Main panel (include build-in battery) 1 set 2) Wireless infrared detector 1 set 3) Wireless door detector 1 set 4) Wireless remote controller 2 pcs 5) 　 Wired siren 　　1 pc 6) 　 User manual 　　1 set 7) phone line 1 set