Sell Water Proofing Systems - WaterGuard I

Description

BENEFITS Pre-packed factory controlled, ensures consistent quality. Excellent resistance to water provides good insulation property (*0C variation). Available in attractive white color Can apply on horizontal and vertical surface. Excellent flexibility. Easy to apply. Excellent bonding with the cement base substrates. DESCRIPTION WATERGUARD I is two part polymer based waterproofing coating, specially designed polymer to ensure perfect water tightness, with insulating property to cool down inner temperature and ensures the flexibility to cover the thermal stresses. WATERGUARD I has an excellent frost resistance. Can be used on vertical and horizontal surfaces. PACKING & COVERAGE WATERGUARD I is pre-packed two components of *0 kg powder + 5 kg liquid, specially designed polymer processed cement and fillers, which covers approximately 5 to 7 m2 depends upon the substrates MIXING WATERGUARD I to be preferably mix by mechanical mixer using electrical drill and paddle attachment. Add powder slowly, mix continuously until a homogeneous mix obtained. WATERGUARD I can also be mixed by hand but should ensure proper mixing. SURFACE PREPARATION All the surfaces should be clean, free from dust and loose laitance. Where on the existing surfaces if cracks are found, should be treated with CRACKSEAL (See separate datasheet). Before application of WATERGUARD I, prevent the surface and excess water is to be removed. APPLICATION On prepared surface apply two coats of WATERGUARD I by brush or roller. Mixed WATERGUARD I should be used within *0 to *5 minutes of mixing. SHELF LIFE Shelf life is a *4 months, if stored under shade in original sealed condition. HEALTH & SAFETY WATERGUARD I is non-toxic but any splashes on the skin should be washed off with water. QUALITY ASSURANCE Fairmate manufactures entire range of construction chemicals under compliance of ISO ********0, ISO (EMS) ****1 & OHSAS ****1 (Occupational Health and Safety) certified by KPMG Peat Marwick.