Description

Hollow-fiber Ultrafiltration Membrane Module SRUF***0 Pure Water Flux:****0L/H, more are available A:The characteristics of Ultrafiltration technology: -UF tech. is an efficient and environmentally, energy-saving separation process -Using lower pressure as a driving force -UF separation process is on under room temperature, low energy consumption -The scale and handle ability range of UF process is large B:Suoai Membrane Fairy: SRUF***0 1.PERFORMANCE PARAMETERS 1.1 Membrane material Polyvinyl Chloride(PVC) 1.2 Molecular Weight Cut-off(MWCO) *0.*****0.**0 Dalton 1.3 Inner and outer diameters of hollow-fiber 0.9mm/1.6mm 1.3 Membrane fiber type Inside-out hollow-fiber 1.4 Charateristics of membrane structure Hydrophilic double-compact layers 1.5 Dimensions of membrane module **0****7mm 1.6 Area of membrane module *0m2 1.7 Pure water flux ****0L/H 2.APPLICATION CONDITIONS 2.1 Pre-filtration *****0um 2.2 Max. turbidity of inlet water <=*5NTU 2.3 Rate flux *****0L/M/H 2.4 Running mode Cross-flow filtration or dead end filtration 2.5 ***** water pressure 0.*5MPa 2.6 Pressure difference of transmembrane at *0°c(TMP) *****0KPa 2.7 Max.Pressure difference of transmembrane 0.2MPa 2.8 Applicable PH range ***2 2.9 Applicable temperature 5°c 2.9.1 Tolerable continuous residual chlorine **0PPm 2.9.2 Tolerable interval residual chlorine **0PPm 3.BACKWASHING DESIGN 3.1 Backwashing pressure 0.*5MPa 3.2 Backwashing flow ******0L/M/H 3.3 Backwashing frequency Every****0 minutes 3.4 Backwashing time ****0 seconds every time 3.5 Frequency of chemically enhanced backwashing(CEB) Auto adding of additives in backwashing is recommended 3.6 Time of chemically enhanced backwashing(CEB) ****0seconds every time ***** WASHING DESIGN 4.1 Frequency of chemically washing every**4months or when TMP is over0.*5MP