Hean High-Pressure Suspension Mill

Description

High Pressure Suspension Mill is applicable to processing high-level milling of more than **0 kinds of materials in the areas of non-flammable mine, metallurgy, chemical, construction materials, etc, such as barite, limestone, ceramics and slag etc. with the mothâï¿&frac*2;ï¿&frac*2;s hardness less than 9.3 and moisture less than 8%. The size of the finished products can be adjusted from *0 to **5. With the special equipments installed, it can produce the coarse sizing materials from *0 meshes to *0 meshes. Operation Principles In the main frame of high suspension mill, there are strong springs with pressure as high as ********0kg equipped on the roller suspender. When operating, the roller rotates around the principle axis, and clings to ring under the effect of the strong spring and eccentricity. Its rolling stress is 1.2 times of Raymond mill under the same press condition, so the production is greatly increased. When the materials are sent into the crushing cavity, they are brought to the space between the roller and ring and get ground. And then the powder ground will be blown into separator; the fine powder after departed with air is discharged through the outlet as final product, while the large-sized powder falls back for regrinding. The circulating air will be back to the blower for repletion of the above process, and the left air will come to the bag filter to get cleaned. When the wear and tear between roller and ring reaches certain degree, we can adjust the length of the strong spring, so as to keep invariable pressure between the roller and ring and to make the stable production and fineness Comparing with other mills, with the same power, the production can increase ****0ïÂ&frac*4;ï¿&frac*2;; with the high pressure spring, the pressure of the roll raises *******0kg. All the materials with mohs hardness less than 9.3 can be milled. Large scope of the finished products size: coarse size can reach 0.**3mm (*0 meshes) at the maximum, grain size usually can reach 0.**3mm